Option SelectionsPlate Warmer (on some models)
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option Use the Plate Warmer cycle to warm serving dishes or dinner
plates.
any time before drying begins.
NOTE: Use the heated drying option with the Plate Warmer.
No Heat Dry1. Close and latch the door.
2. Press HEATED DRY or RESET OPTIONS (depending on your
Select this energy-saving option to dry without heat. No heat model).
drying is useful when loads contain plastic dinnerware that may 3. Turn the cycle control knob to PLATE WARMER.
be sensitive to high temperatures.4. The cycle control knob will turn itself to OFF when the dishes
The dishes take longer to dry and some spotting can occur. For are ready.
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: The dishwasher automatically heats the air in the Drying System
dishwasher during the ?dry? portion of the cycle unless you During drying, you can see steam escaping through the vent at
select No Heat Dry.the upper left corner of the door. This is normal as the heat dries
your dishes.
Heated Dry
Select this option to dry dishes with heated air. For best drying
results, use a liquid rinse aid and heated drying.
NOTE: Heated Dry is an option with all cycles except Rinse Only.
Hi-Temp Boost (on some models)
IMPORTANT: The vapor is hot. Do not touch the vent
Select this option to add extra heat to the water in the Heavy during drying.
wash or Normal wash cycles. This helps remove food soil.
Overfill Protection Float
Reset Options
The overfill protection float (in the front right corner of the
Select this option to change an option setting. You can change dishwasher tub) keeps the dishwasher from overfilling. It must be
option settings anytime during a cycle as long as the cycle has in place for the dishwasher to operate.
not passed the point where the option is used. For example, you
can press No Heat Dry anytime before the cycle control knob
reaches Dry.
1. Press RESET OPTIONS.
2. Press 1 or more options.
Check under the float for objects that may keep the protector
Delay Hours (on some models)from moving up or down.
Use Delay Hours to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it WASHING SPECIAL ITEMS
latches. The delay countdown will not continue if the door is not
latched.If you have doubts about washing a particular item, check with
the manufacturer to see if it is dishwasher safe.
To delay the start
1. Close the door.MaterialDishwasher Safe?/Comments
2. Select a wash cycle and option(s).
AluminumYes
3. Turn the cycle control knob clockwise to the number of hours
High water temperature and detergents
you want the dishwasher to delay the start. can affect finish of anodized aluminum.
NOTES:
To cancel the delay, turn the cycle control knob to the desired Disposable No
cycle.AluminumDo not wash throwaway aluminum pans
in the dishwasher. These might shift
Rinse Only and Normal wash cycles cannot be delayed.
during washing and transfer black marks
to dishes and other items.
Bottles and CansNo
Wash bottles and cans by hand. Labels
attached with glue can loosen and clog
the spray arms or pump and reduce
washing performance.
15 |
ACEC
WHIRLPOOL
