Before starting your dishwasher
1. Read ?Important Safety Instructions? on page
2 before starting your dishwasher.
2. Spin the Upper and Lower Spray Arms to
makesure nothing will stopthem from turning
freely.
3. Push door firmly when closing and it will auto-
matically latch.
4. Run hot water atsink nearest dishwasher until
it is hot. Turn it off.
Starting your dishwasher
CYCLE SELECTOR BUllONS
POTS & PANS Cycle...
1. Push POTS & PANS Cycle Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to line NORMAL WASH Cycle...
marked POTS & PANS. (POTS & PANS and NOR- 1. Push NORMAL WASH Cycle Selector Button.
MAL WASH Cycles share the same spot on the 2. Push button for option desired.
dial. The Selector Buttons determine which 3. Turn Cycle Control Knob clockwise to line
cycle operates.) marked NORMAL WASH. (NORMAL WASH and
The dishwasher will automatically start that POTS & PANS Cycles share the same spot on
cycle. the dial. The Selector Buttons determine
which cycle operates.)
LIGHT WASH Cycle... The dishwasher will automatically start that
1. Push LIGHT WASH Cycle Selector Button. cycle.
- LIGHT WASH and NORMAL WASH Cycles
share the same Cycle Selector Button. The RINSE & HOLD Cycle...
Control Knob setting determines which
cycle operates. 1. Push NORMAL WASH Cycle Selector Button.
2. Push button for option desired. 2. Select AIR DRY Option only.
3. Turn Cycle Control Knob clockwise to line 3. Turn Cycle Control Knob clockwise to line
marked LIGHT WASH. The dishwasher will marked RINSE & HOLD. The dishwasher will
automatically start that cycle. automatically start that cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63?C) in both
washes and the last rinse [marked *).
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
NORMAL WASH Cycle
For normal, everyday soiled loads. .Iwl,m,m--
(The Energy Guide Label data is
based on this cycle.] Cycle time is
about 63 minutes.
LIGHT WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 58
minutes.
8 |
ACEC
WHIRLPOOL
