Adding a dish during a cycle
You can add an additional item to the
dishwasher anytime before the main wash
portion of a cycle. See chart on pages 12
and 13.
1. Lift up the door latch to stop the cycle.
Wait for spraying action to stop before
opening the door.
2. Open the door and add the item.
3. Close the door, but do not latch it. Wait
30 seconds for the air in the dishwasher
to warm up. Doing so reduces the
amount of moisture in the vent when
restarting a cycle.
4. Close the door firmly until it latches. The
dishwasher resumes the cycle.
Using the delay wash cycle
Use 4 HOUR DELAY START to run the NOTES:
dishwasher during off-peak hours to reduce l Press 4 HOUR DELAY START anytime
energy usage or to reduce daytime heat during the delay period to start
buildup in your home. dishwasher immediately.
1. Close door firmlv . until it latches.
l Press CANCEUDRAIN to cancel the delay
I)
m cycle. The 4 HOUR DELAY
I ? J
START indicator will turn
2. Press 4 HOUR DELAY START. The pad off. Press new Cycle and Option
I pads.
lliil
l You can add items to the load anytime
during the delay countdown. After adding
items, close the door firmly until it latches.
The delay countdown will not continue if
3. Press a Cycle pad. The DELAY START
the door is not latched.
countdown begins when you
press the Cycle pad. If you
don?t press a Cycle pad within
30 seconds, the DELAY
START indicator turns off.
4. If desired, press one or more Option pad(s).
The 4 HOUR DELAY START indicator stays
on until the wash cycle begins,
15 |
ACEC
WHIRLPOOL
