Troubleshooting
In case you experience any problem with this unit, please takeSound skips.
the time to look through this chart and see if you can solve theePlace the unit on a stable place to avoid vibration and shock.
problem yourself before you call your dealer or a TEAC serviceeIf the disc is dirty, clean the surface of the disc.
center.eDon't use scratched, damaged or warped discs.
No powerThere is no sound or only a very low-level sound is heard.
eCheck the connection to the AC wall outlet. Make sure theeCheck that the amplifier and speakers are connected
outlet is not switched by a lamp switch by plugging insecurely.
another electrical device to see if the outlet is "live".eCheck the operation of the amplifier.
ePress the POWER switch of the main unit to turn it on.eCheck the audio output setting. (see page 37)
eWhen the amplifier is connected via the DIGITAL OUT
Remote control doesn't work.terminal, set the Digital Out setting to "On".
ePress the POWER switch of the main unit to turn it on.eThe sound is muted during pause, slow-motion, fast
eIf the batteries are dead, change the batteries.forward/reverse, and stepping playback. Press the PLAY
eUse remote control unit within the range (5m /15ft) and pointbutton to resume normal playback.
at the front panel.
eClear obstacles between the remote control unit and theCannot play multi-channel audio.
main unit.eSet the Audio Out setting to "5.1 Channel".
eIf a strong light is near the unit, turn it off.eCheck that the settings in the Speaker Setting screen are
correct.
Severe hum or noise is heard.eDisplay the disc menu and select a multi-channel audio
eCheck that the speakers and components are connectedlanguage.
securely.
eMake sure the line cords and speaker cables are as farNo digital audio output.
away from the AC supply as possible.eCheck that Digital Out setting is set to On.
eThis unit cannot play such discs as CD-ROMs. Use aeSome DVD-Audio discs prohibit digital audio output.
playable disc.eNo digital audio is output when playing SACD.
eNo digital audio is output when playing DVD-Audio in multi-
Cannot play.channel(other than Dolby Digital or DTS) or 192/176.4kHz.
The disc is ejected automatically after loading.
eReload the disc with the label side UP.Cannot output 96kHz or 88.2kHz digital audio.
eIf the disc is dirty, clean the surface of the disc.eCheck that the Linear PCM setting is set to Down Sample
eA blank disc has been loaded. Load a prerecorded disc.Off.
eCheck the region code of the DVD.eSome copy protected discs do not output high sampling rate
eIf the unit is condensed, leave the unit for one or two hoursdigital audio.
with the power turned on (see page 51).
No DTS audio output.
PROHIBIT icon (or) appears on the screen.eWhen your amplifier is not equipped with DTS decoder, set
eThe operation is not permitted by the disc or the unit.the DTS Out setting to "DTS-PCM". Or press the AUDIO
eNote that during playback of a title part (cautions, softwarebutton to select other audio languages.
maker's logo, etc.), most operations are prohibited by theeCheck the setting of your amplifier.
disc.
eIf another operation is still in process, wait a moment and tryNo picture.
again. eTurn on the TV.
eCheck that the system is connected properly.
Settings are canceled.eMake sure you have selected the proper video input on the
eWhen the power is suddenly cut due to power failure or byTV so that you can view the pictures from the DVD player.
unplugging the power cord, settings will be cancelled. BeeCheck the Video Out settings.
sure to turn the unit off by pressing the POWER switcheWhen your TV isn't compatible with Progressive scan, never
before unplugging the power cord.set the progressive mode on. (see page 41)
eIf the power is switched off before exiting the Setup menu,
the settings are not stored. Make sure that you exit thePicture noise.
Setup menu after changing any settings before switchingeIf video from this system has to go through your VCR to get
off.to your TV, the copy-protection applied to some DVD
programs could affect picture quality. Please connect the
When making changes in the Setup menus, "DVD" is displayed.unit directly to your TV.
eIf you try to change settings for DVD while a disc other than
DVD is loaded, "DVD" icon will briefly appear on the screen.The image is distorted or monochromatic.
The change will take effect when a DVD is loaded next time.eThe color system selected does not match your TV.
eSelect the aspect ratio to match your TV.
Some settings in the Setup Menu do not appear.
eSettings marked with the "EXPERT" icon are available only in
Expert mode (see page 35).
50 |
ACEC
TEAC
