Character Input/Output drawing (DVD video blackboard)
DVD.
Indicator on the top of right
To change the display mode
GROUP 0011.Move the cursor to the line you want to
001 R�3,RED 02-015.29~015.36 A
change and click the left button of the
mouse.
2.Move the cursor to AUTO DISP and click the left
button of the mouse.
AUTO DISPSAVEDELEXIT
Indicator display on the right edge of screen
A:Displayed at the same time as the disc playback,
from the set start point through the set end point.
Notes
÷ It takes time to draw a graphical image, so if you are using itA S :The video becomes a still image at the set start
to hide part of the video image, the image-drawing IN pointpoint.
must be set sufficiently in advance of the desired scene.
� A S :The video becomes a still image immediately be-
Drawing time varies according to the type of drawn graphic
fore the set start point.
and the number of drawings. As a rule of thumb, the drawing
time is usually in the range of 10 to 30 frames.No display :The set characters or pictures are not displayed.
ENTER
If different graphics are recorded in adjacent frames, they÷
Pressing in this section starts drawing.
may not be drawn on the screen during continuous play-
back due to drawing speed constraints.S :The video becomes the still image at the set start
÷ Operation will not be performed according to the settingpoint but objects are not displayed.
during frame reverse or reverse playback.ENTER
Press on the remote control unit to start pic-
ture drawing.
=:The = mark is displayed on the top right of the
screen during playback.
ENTER
Pressing in this section starts drawing.
= S :The video becomes a still image, in which only the
= mark is displayed, at the set start point.
ENTER
Press on the remote control unit to start pic-
ture drawing.
Meaning of displayed symbols
OS� stands for OStill image� and plays a still image at the IN
point.
OA� stands for OAuto display�, which displays drawing in the
screen set with AUTO DISP.
O=� displays only the = marking.
O�� displays a still image immediately before the start of the
IN point.
DVD.
Pencil tool/freehand drawing
Click the right button of the mouse in the video blackboard
input screen to turn the pointer into the pencil tool. Freehand
drawing is possible by holding the mouseOs left button.
Draw by dragging the left button pressed.
Clicking the right button again displays the Blackboard screen.
To change the color or line width, select COLR or the tool
on the Blackboard screen. (See ODrawing Tools� on page 72.)
NOTE:
÷Pictures can be drawn using the pencil tool but they can-
not be saved later.
74
En |
ACEC
PIONEER
