English
Note:
NTSC/PAL Settings
� If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
You can switch the NTSC/PAL setting of the DVD player to
distorted sound or no sound at all.match the video signal of your TV. This setting only affects
� The selected audio format of the DVD is displayed in the
the televisionOs on-screen display that shows the stop and
Status Window when the SYSTEM MENU is activated or when
setup modes. You may select either NTSC or PAL. To
the Audio button is pressed.change the DVD player setting to PAL or NTSC, follow the
� Six Channel Digital Surround Sound via digital connection
steps below.
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.1Press the POWER ON/OFF button on the front panel of
� To see the selected audio format of the current DVD in thethe DVD player to turn OFF the DVD player.
Status Window, press the SYSTEM MENU or the Audio
2Press and hold 9 and SOUND, on the front of the DVD
Language selector button.
player. While holding 9 and SOUND, press POWER ON/
OFF.
Analog connection to a multi-channel A/V
3After PAL or NTSC appears on the display panel of the
receiver with 6 Channel connectors (DolbyDVD player, release 9 and SOUND, at the same time.
Digital / DTS)The PAL or NTSC indicator that appears on the display
panel indicates the current setting.
This DVD player contains a multi-channel decoder. This
4To change the setting, press SOUND, within three
enables playback of DVDs recorded in Multi-channel
seconds. The new setting (PAL or NTSC) will appear on the
Surround without the need for an optional decoder.
display panel.
1Connect the audio out jacks for the Center speaker and
the Subwoofer connection (C) to the corresponding in
jacks on your receiver.
General explanation
2Connect the Left and Right audio out jacks for the Front
speaker (B) to the corresponding in jack on your receiver.
About this manual
3Connect the Left and Right audio out jacks for Surround
speaker (D) to the corresponding in jacks on your receiver.This manual gives the basic instructions for operating the
4Make the appropriate Sound settings for Analog OutputDVD player. Some DVDs require specific operation or
and Speaker Settings in the Personal Preferences menu.allow only limited operation during playback. When this
occurs, the symbol ? appears on the TV screen, indicating
that the operation is not permitted by the player or the
AMPLIFIER
disc.
Remote control operation
TV
? Unless stated, all operations can be carried out with the
remote control. Always point the remote control directly at
the player, making sure there are no obstructions between
the remote and the player.
Corresponding keys on the front panel of the player can
also be used.
DCBXYZ
Menu bar operation
DIGITAL AUDIO OUTPCM/MPEG2/AC3/DTSSURROUNDCENTERFRONTLLL1? A number of operations can be carried out via the menu
RRR2
MAINSCVBSS-VIDEOCRCBYbar on the screen. The menu bar can be accessed by
OPTICALCOAXIALSURROUNDSUB WFFRONTMULTICHANNEL AUDIO OUTAUDIO OUT
VIDEO OUT
pressing the cursor keys on the remote control.
? Pressing SYSTEM MENU while the menu bar is displayed
will clear the menu bar from the screen.
? The selected item will be highlighted and the appropriate
cursor keys to operate will be displayed below the icon.
? The symbols < or > indicates that more items are available
at the left/right of the menu bar. Press t or u to select
these items.
10PREPARATION |
ACEC
PHILIPS
