Changing settingsUsing this unit with other equipment
Digital outputEnjoying more powerful sound
SETUP PLAY MODE[DVD-V]This model can play Dolby Digital and DTS, but only in two channels. You must connect a unit with a
ANGLEChange these settings when you have Dolby Digital or DTS decoder to enjoy surround sound.
+;1connected digital equipment.
TOP MENUDISPLAYSUBTITLENote
AUDIOeThe equipment connections described are examples.
ENTERENTERePeripheral equipment and optional cables sold separately unless otherwise indicated.
MENURETURNA.SRDPCM Down Conversion
eBefore connection, turn off all equipment and read the appropriate operating instructions.
CANCEL
132CANCELSelect how to output audio with a sampling
Numbered465S10frequency of 96 kHz.ADigital connection
Select OYes� if the equipment you connect cannot
buttons7980
process signals with a sampling frequency of
6:59To enjoy multi-channel surround sound To enjoy stereo or Dolby Pro Logic
96 kHz.
Connect an amplifier with a built-in decoder or aConnect a digital amplifier or system component.
eSelect ONo� if you use analogue connection,
decoder-amplifier combination.eChange the settings in ODigital output�
irrespective of the type of equipment.
eChange the settings in ODigital output� e(! page 28).
No (Factory preset):
(! page 28).
Output as 96 kHz. There is no output if the disc
Entering a password
has copy protection. Select OYes� in this case.Note
Yes:You cannot use DTS Digital Surround
Remote control only
Converted to 48 kHz for output.decoders not suited to DVD.
[DVD-V]Amplifier
The password screen is shown when you selectSpeakers(Example)
Dolby Digital and DTS Digital
levels 0 to 7.You can enjoy surround sound
1. Input a 4-digit password with the numberedSurroundby connecting three or more
buttons and press [ENTER].speakers.
Bitstream(Factory preset for Dolby Digital):
1.eIf you enter a wrong number, press
Select if the equipment can decode the signal.OPTICAL IN
[CANCEL] to erase it before you pressOptical fiber cable
PCM (Factory preset for DTS Digital Surround):
[ENTER].Do not bend sharply.
Select if the equipment cannot decode the
1.eThe lock symbol appears closed to show the
signal.
rating is locked.
1.eDo not forget your password.IMPORTANT
2. Press [ENTER] to confirm the 4 digits.If the equipment cannot decode the signal,
the setting must be changed to PCM. If not,BAnalogue connection
Advanced OperationsNow, when you insert a DVD-Video that signals the equipment cannot process will beAdvanced Operations
To enjoy stereo or Dolby Pro Logic
exceeds the ratings limit you set, a messageoutput, causing high levels of noise which
AUDIOOPT OUT
Connect an analogue amplifier or systemVOLVIDEO
appears on the screen.can damage your hearing and the speakers.
component.
Follow the on-screen instructions.
This unit (Right side)
LINE IN
white
Lblack
red
R
Stereo connection cable
RQT6450RQT6450
Analog amplifier or mini-system
2829 |
ACEC
PANASONIC
