6-4. DRIVE AUTO ADJUSTMENT1. DVD-SL (single layer)
Select 1, insert DVD single layer disc, and press ENTER key,
On the Test Mode Menu screen,1 press key on the remote
and the adjustment will be made through the following steps, then
commander, and the drive auto adjustment menu will be displayed.
adjusted values will be written to the EEPROM.
## Drive Auto Adjustment ##
DVD Single Layer Disc Adjustment Steps
Adjustment Menu1. SLED TILT Reset
2. Disc Check Memory SL
0. All3. Wait 300 msec
1. DVD-SL
4. Set Disc Type SL
2. CD
5. LD ON
3. DVD-DL
6. Spdl Start
4. SACD
5. SL->CD->DL7. Wait 1 sec
_8. Focus Servo ON 0
9. Auto Track Offset Adjust
Exit:RETURN10. CLVA ON
11. Wait 500 msec
Normally-, is selected to adjust DVD (single layer), CD12. Trac, Dking ONVD
(dual layer), and SACD in this order. But, individual items can be13. Wait 1 sec
adjusted for the case where adjustment is suspended due to an error14. Sled ON.
In this mode, the adjustment can be made easily through the15. Check CLV Lock
operation following the message displayed on the screen. 16. Auto LFO The discAdjust
used for adjustment must be the one specified f17.or adjustment.Auto Focus Offset Adjust
However, for SACD disc, use the player with initial da18. Auto Tta if the discilt Position Adjust
is not available.19. Auto Focus Gain Adjust
20. Auto Focus Offset Adjust
0. ALL21. EQ Boost Adjust
22. Auto LFO Adjust
Select - and press ENTER key, and the servo set data in EEPR23. Auto TrOMack Gain Adjust, Search Check
will be initialized. Then, 1. DVD-SL disc, 2. CD disc24. 32Tj Fwd, 3. DVD-DL
disc, and 4. SACD disc are adjusted in this order25.. Eac32Tj Reh time onev
disc was adjusted, it is ejected. Replace it with the specif26. 500Tj Fwd ied disc
following the message. Though the message to conf27.irm 500Tj Rewhetherv
discs other than SACD disc are adjusted is not displayed, you can
finish the adjustment if pressing the STOP 28.button. DuringAll Servo Stop
adjustment of each disc, the measurement for disc type judgment is29. Eep Copy Loop Filter Offset
made. As automatic adjustment does not judge the disc type unlike
conventional models, take care not to insert wrong type discs. Also,
do not give a shock during adjustment.
6-5 |
ACEC
SONY
