A AUDIO FILTER (except Super Audio CD)
Note
Selects the digital filter to reduce noise above
22.05 kHz (Sampling frequency (Fs)S ofuper t Ahudioe CD audio signals are not output from
audio source is 44.1 kHz), 24 kHz (a digiFs itas 4l ja8 ck.
kHz), or 48 kHz (Fs is above 96 kHz).
Setting the digital output signal
SHARPProvides a wide frequency
range and spatial feelingS.witches the method of outputting audio
SLOWProvides smooth and warm signals when you connect a component such
sound.as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 22.
NoteSelect ?DOLBY DIGITAL,? ?MPEG,?
?DTS,? and ?48 kHz/96 kHz PCM? after
There may be little effect by changing the digital
setting ?DIGITAL OUT? to ?ON.?
filter depending on discs or playback environment.
A DOWNMIX (DVD VIDEO/DVD-RW only)AUDIO SETUP
AUDIO ATT:OFF
Switches the method for mixing down to 2AUDIO DRC: STANDARD
AUDIO FILTER:SHARP
channels when you play a DVD which has
DOWNMIX:DOLBY SURROUND
rear sound elements (channels) or is recDIGITAL OUT:orded ON
DOLBY DIGITAL:D-PCM
in Dolby Digital format. For details on the
DTS:D-PCM
rear signal components, see ?Displaying t48kHz/96kHz PCM:he 48kHz/16bit
audio information of the disc? (page 56). This
function affects the output of the following
jacks:If you connect a component that does not
-LINE OUT L/R (AUDIO) 1/2 jacksconform to the selected audio signal, a loud
-DIGITAL OUT (OPTICAL or COAXIAL) noise (or no sound) will come ouSettings and Adjustmentst from the
jack when ?DOLBY DIGITAL? and ?DTSsp?e akers, damaging your ears or speakers.
is set to ?D-PCM? (page 79).
A DOLBY DIGITAL (DVD VIDEO/DVD-RW
DOLBY Select this when the playeonr isly)
SUR-connected to an audio Selects the type of Dolby Digital signal.
ROUNDcomponent that conforms to
Dolby Surround (Pro Logic)D-P.CMSelect this when the player is
connected to an audio
NORMALSelect this when the player is
component without a built-in
connected to an audio
Dolby Digital decoder. You can
component that does not
select whether the signals
conform to Dolby Surround (Pro
conform to Dolby Surround
Logic).
(Pro Logic) or not by making
adjustments to the
A DIGITAL OUT?DOWNMIX? item in
?AUDIO SETUP? (page 79).
Select this if audio signals are to be output via
the DIGITAL OUT (OPTICAL or DOLBY Select this when the player is
COAXIAL) jack.DIGITALconnected to an audio
component with a built-in
ONNormally select this position. When Dolby Digital decoder.
you select ?ON,? see ?Setting the
digital output signal? for further
settings.
OFFThe influence of the digital circuit
upon the analog circuit is minimal.
,continued79 |
ACEC
SONY
