Forks and spoons should be placed in the removable cutleryAdjusting the height of the upper basket
basket with the handles facing downwards and the knives with
If washing very large plates you can load them in the lower
their handles facing upwards.
basket after moving the upper basket to the higher position.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
Maximum height of the dishes in
handles facing upwards.
upper basketlower basket
Mix spoons with other cutlery to prevent them from sticking
together.With upper basket raised20 cm31 cm
For best results weWith upper basket lowered24 cm27 cm
recommend you to use the
cutlery grids provided (if the
To move to the higher position proceed as
size and dimensions of the
cutlery allow it).follows:
1.Move the front runner stops (A) of the upper basket
The cutlery basket is in two
outwards and slide the basket out.
parts which can be
separated to give greater
2.Refit the basket in the higher position and replace the stops
loading flexibility. To separateUI63(A) in their original position.
the two parts, slide them
horizontally in opposite
When the basket is in the
directions and pull them
higher position you will not
apart. To reassemble,
be able to use the cup
reverse the procedure.
rack(s).
UI62
RC01
After loading your machine always close the door, as an
open door can be a hazard.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
US47
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
US71
Before closing the door, ensure that the spray arms can
rotate freely.
10 |
ACEC
ZANUSSI
