Install properly.. . Remove sales labels.. .
Remove the Consumer Buy Guide label and other
rnstde labels before using the refrigerator Any glue
left can be taken off with rubbing alcohol.
-..ru~e~c-~-~~---~--~
Clean it.. .
Clean your refrigerator before usrng It. See clean-
ing rnstructrons on page 9
I. Allow ?/2? (.2 cm] space on each side and at top for
ease of installation.
2. The refrigerator back can be flush against the
WCIII.
3. If the refrigerator is to be against a wall, you might
want to leave enough space so the door can be
opened wider.
e Screwdriver
U-grounding plug
t
Refrigerator
Power Cord
Recommended
Grounding Method
A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused
electrical supply is required. It is recommended that
a separate circuit serving only this appliance
be provided.
Right to Raise; Do not use an extension cord. Use a receptacle
Left to lower which cannot be turned off wlth a switch or pull
chain. See individual electrical requirements and
1. Remove base grille (see page 9 ). grounding instruction sheet in your literature
2. To raise front, turn each screw to the right
3. To lower front. turn each screw to the left.
4. Check with level.
4 |
ACEC
WHIRLPOOL
