The Dispenser LightRemoving and Replacing Ice Storage Bin
Style 1: The dispenser light can be turned on by pressing the ON 1. Pull the covering panel up from the bottom and then slide it
button.back toward the rear.
Style 2: When you use the dispenser, the lever will automatically 2. Lift the wire shutoff arm so it clicks into the OFF (up) position.
turn the light on. If you want the light to be on continuously, you Ice can still be dispensed, but no more can be made.
may choose either ON or NIGHT LIGHT. 3. Lift up the front of the storage bin and pull it out.
ON: Press the LIGHT button to turn on the dispenser light.
NIGHT LIGHT: Press the LIGHT button a second time to select
the Night Light. The dispenser light will automatically adjust to
become brighter as the room brightens, dimmer as the room
darkens.
OFF: Press the LIGHT button a third time to turn off the dispenser
light.
The dispenser lights are LEDs which should not need to be
changed. If it appears that your dispenser lights are not working,
be sure that the light sensor is not blocked (in Night Light mode). 4. Replace the bin by pushing it in all the way or the dispenser
will not work. Push the wire shutoff arm down to the ON
See ?Troubleshooting? for more information. position to restart ice production. Make sure the door is
closed tightly.
Water Filtration System
The Dispenser Lock (on some models)
Do not use with water that is microbiologically unsafe or of
Your dispenser can be turned off for easy cleaning or to prevent unknown quality without adequate disinfection before or
unintentional dispensing by small children and pets. after the system.
NOTE: The lock feature does not shut off power to the product, to
the ice maker, or to the dispenser light. It simply deactivates the
dispenser levers. The ice and water dispensers will not work.Water Filter Status Light (on some models)
Style 1: Press the LOCK button to lock the dispenser. Press the
UNLOCK button to unlock the dispenser. The filter status light will help you know when to change your
water filter. The light will change from green to yellow. This tells
Style 2: Press and hold the LOCK OUT button to lock the
dispenser. Press and hold the LOCK OUT button a second time to you that it is almost time to change the filter. It is recommended
unlock the dispenser. that you replace the filter when the status light changes to red OR
water flow to your water dispenser or ice maker decreases
noticeably.
Ice Maker and Storage BinAfter changing the filter, reset the filter status light by pressing the
FILTER RESET button. The status light will change from red to
Turning the Ice Maker On/Offgreen when the system is reset.
To turn ON the ice maker, simply lower the wire shutoff arm.Non-indicator Water Filter (on some models)
To manually turn off the ice maker, lift the wire shutoff arm to the
OFF (arm up) position and listen for the click.If your refrigerator does not have the status light, you should
change the water filter every 6 months depending upon your
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes will fill the ice storage bin, and the ice cubes will usage. If the water flow to the water dispenser or ice maker
decreases noticeably before 6 months have passed, replace the
raise the wire shutoff arm to the OFF (arm up) position. Do not water filter more often.
force the wire shutoff arm up or down.
REMEMBER:Changing the Water Filter
Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.1. Press the eject button to release the filter from the base grille.
The quality of your ice will be only as good as the quality of the 2. Pull the filter straight out.
water supplied to your ice maker. Avoid connecting the ice 3. Turn the cap counterclockwise to remove it from the filter.
maker to a softened water supply. Water softener chemicals
(such as salt) can damage parts of the ice maker and lead to IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
poor quality ice. If a softened water supply cannot be avoided,
make sure the water softener is operating properly and is well 4. Align the ridge on the cap with the arrow on the new filter and
maintained.turn the cap until it snaps into place.
Do not use anything sharp to break up the ice in the storage NOTE: You can run the dispenser without a filter. Your water
bin. This can cause damage to the ice container and the will not be filtered. Simply insert the cap all of the way into the
dispenser mechanism.base grille and rotate the cap until it is firmly in place.
Do not store anything on top of or in the ice maker or storage 5. Remove the protective covers from the O-rings. Be sure the
bin.O-rings are still in place after the covers are removed.
6. Push the filter into the base grille. The eject button will pop
back out when the filter is fully engaged.
7. Flush the water system. See ?Water and Ice Dispensers.?
7 |