DOOR FEATURESREFRIGERATOR CARE
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled Cleaning
with the word ?Accessory.? Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the ?Accessories?
section.
Door Rails
The door rails may be removed for easier cleaning.
Snap-on Door Rails
To remove and replace the rails:
Explosion Hazard
1. Remove the rails by pushing in slightly on the front of the
bracket while pulling out on the inside tab. Repeat these Use nonflammable cleaner.
steps for the other end of the rail.Failure to do so can result in death, explosion,
2. Replace the rails by aligning the ends of the brackets with the or fire.
buttons on the sides of the door liner. Firmly snap bracket
and rail assembly onto the tabs above the shelf as shown.
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to prevent
odors from building up. Wipe up spills immediately.
Cleaning your refrigerator
1. Unplug refrigerator or disconnect power.
2. Remove all removable parts from inside, such as shelves,
Drop-in Door Railscrispers, etc.
3. Hand wash, rinse, and dry removable parts and interior
To remove and replace the rails:
surfaces thoroughly. Use a clean sponge or soft cloth and a
1. Remove the rails by pulling straight up on each end of the rail.mild detergent in warm water.
2. Replace the rails by sliding the shelf rail into the slots on the Do not use abrasive or harsh cleaners such as window
door and pushing the rail straight down until it stops. sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs. to 1 qt.
[26 g to .95 L] of water).
Can Racks and Door Bins 4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
(on some models)not use abrasive or harsh cleaners. Dry thoroughly with a soft
cloth. For additional protection against damage to painted
NOTE: Can racks may be purchased as an Accessory for some
models.metal exteriors, apply appliance wax (or auto paste wax) with
a clean, soft cloth. Do not wax plastic parts.
To remove and replace the racks/bins:
NOTE: To keep your Stainless Steel refrigerator looking like
1. Remove the rack/bin by lifting it and pulling it straight out.
new and to remove minor scuffs or marks, it is suggested that
2. Replace the rack/bin by sliding it in above the desired you use the manufacturer?s approved Stainless Steel Cleaner
support and pushing it down until it stops.& Polish.
IMPORTANT: This cleaner is for Stainless Steel parts only!
Do not allow the Stainless Steel Cleaner & Polish to come into
contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If accidental contact does
occur, clean plastic part with a sponge and mild detergent in
warm water. Dry thoroughly with a soft cloth. To order the
cleaner, see the ?Accessories? section.
16 |
ACEC
WHIRLPOOL
