The Dispenser LightRemoving and Replacing Ice Storage Bin
Style 1: The dispenser light can be turned on by pressing the ON 1. Hold the base of the storage bin with both hands and press
button.the release button to lift the storage bin up and out.
Style 2: When you use the dispenser, the lever will automatically NOTE: It is not necessary to turn the ice maker control to the
turn the light on. If you want the light to be on continuously, you OFF (right) position when removing the storage bin. The
may choose either ON or NIGHT LIGHT. sensor cover (?flipper door?) on the left wall of the freezer
stops the ice maker from producing ice if the door is open or
ON: Press the LIGHT button to turn the dispenser light on.
the storage bin is removed.
NIGHT LIGHT: Press the LIGHT button a second time to select
the Night Light. The dispenser light will automatically adjust to 2. Replace the storage bin on the door and push down to make
become brighter as the room brightens, dimmer as the room sure it is securely in place.
darkens.
OFF: Press the LIGHT button a third time to turn the dispenser
light off.
The dispenser lights are LEDs which should not need to be
changed. If it appears that your dispenser lights are not working,
check to be sure that the light sensor is not blocked (in Night Light
mode). See ?Troubleshooting? for more information.
Water Filtration System
The Dispenser Lock (on some models)NOTE: Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before or
after the system. Systems certified for cyst reduction may be
Your dispenser can be turned off for easy cleaning or to prevent used on disinfected waters that may contain filterable cysts.
unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the product, to
Water Filter Status Light (on some models)
the ice maker, or to the dispenser light. It simply deactivates the
dispenser levers. The ice and water dispensers will not work.The filter status light will help you know when to change your
Style 1: Press the LOCK button to lock the dispenser. Press the water filter. The light will change from green to yellow. This tells
UNLOCK button to unlock the dispenser. you that it is almost time to change the filter. It is recommended
Style 2: Press and hold the LOCK OUT button to lock the that you replace the filter when the status light changes to red OR
dispenser. Press and hold the LOCK OUT button a second time to water flow to your water dispenser or ice maker decreases
unlock the dispenser. noticeably.
After changing the filter, reset the filter status light by pressing the
button. The status light will change from red to green when the
Ice Maker and Storage Binsystem is reset.
Turning the Ice Maker On/OffNon-indicator Water Filter (on some models)
The ON/OFF switch is located on the top right-hand side of the If your refrigerator does not have the status light, you should
freezer compartment.change the water filter every 6 months depending upon your
To turn on the ice maker, slide the control to the ON (left) position.usage. If the water flow to the water dispenser or ice maker
To manually turn off the ice maker, slide the control to the OFF decreases noticeably before 6 months have passed, replace the
water filter more often.
(right) position.
NOTE: Your ice maker has an automatic shutoff. The ice maker
Changing the Water Filter
sensors will automatically stop ice production, but the control will
remain in the ON (left) position.
1. Press the eject button to release the filter from the base grille.
REMEMBER:
2. Pull the filter straight out.
Allow 24 hours to produce the first batch of ice. Discard the
3. Turn the cap counterclockwise to remove it from the filter.
first three batches of ice produced.
The quality of your ice will be only as good as the quality of the IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
water supplied to your ice maker. Avoid connecting the ice
maker to a softened water supply. Water softener chemicals 4. Align the ridge on the cap with the arrow on the new filter and
(such as salt) can damage parts of the ice maker and lead to turn the cap until it snaps into place.
poor quality ice. If a softened water supply cannot be avoided, NOTE: You can run the dispenser without a filter. Your water
make sure the water softener is operating properly and is well
will not be filtered. Simply insert the cap all of the way into the
maintained.
base grille and rotate the cap until it is firmly in place.
Do not use anything sharp to break up the ice in the bin or 5. Remove the protective covers from the O-rings.
bucket. This can cause damage to the ice container and the
6. Push the filter into the base grille. The eject button will pop
dispenser mechanism.
back out when the filter is fully engaged.
Do not store anything on top of or in the ice maker or storage
7. Flush the water system. See ?Water and Ice Dispensers.?
bin.
7 |
ACEC
WHIRLPOOL
