3. Thread the provided nut onto the water valve as shown.Style 2
NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.
A
B
IMPORTANT:
Your product will not cool when the REFRIGERATOR Control
is set to OFF.
A.Bulb
The Refrigerator Control adjusts the refrigerator compartment
B.Nut (provided)
temperature. The Freezer Control adjusts the freezer
4. Turn shutoff valve ON.compartment temperature. Settings to the left of the mid-
setting make the temperature less cold. Settings to the right of
5. Check for leaks. Tighten any nuts or connections (including
the mid-setting make the temperature colder.
connections at the valve) that leak.
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
Complete the Installation
food may spoil.
Style 1
Turn the control to the right (clockwise) to make the compartment
colder or to the left (counterclockwise) to make it less cold. WARNING
Style 2
1. Push control button on the side of the control box and
release it.
2. The control will pop out. Turn the control to the desired
setting.
3. Push the control in to lock it into place.
Electrical Shock Hazard
NOTE: Adjusting the Refrigerator and Freezer Controls to a higher
Plug into a grounded 3 prong outlet.(colder) than recommended setting will not cool the
compartments any faster.
Do not remove ground prong.
Adjusting ControlsDo not use an adapter.
Do not use an extension cord.Give the refrigerator time to cool down completely before adding
food. It is best to wait 24 hours before you put food into the
Failure to follow these instructions can result in death,
refrigerator. The settings indicated in the previous section should
fire, or electrical shock.be correct for normal household refrigerator usage. The controls
are set correctly when milk or juice is as cold as you like and when
ice cream is firm.
1. Plug in refrigerator or reconnect power.
2. Flush the water system. See ?Water and Ice Dispensers.?If you need to adjust temperatures in the refrigerator or freezer,
use the settings listed in the chart below as a guide. Wait at least
NOTE: It may take up to 24 hours for your ice maker to begin 24 hours between adjustments.
producing ice.
CONDITION/REASON:ADJUSTMENT:
REFRIGERATOR too warmREFRIGERATOR
REFRIGERATOR USE
Control one setting
higher
Using the Controls
FREEZER too warm/too little iceFREEZER Control
For your convenience, your refrigerator controls are preset at the one setting higher
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer REFRIGERATOR too coldREFRIGERATOR
Control should both be set to the ?mid-settings.? Control one setting
Style 1lower
FREEZER too coldFREEZER Control
one setting lower
5 |
ACEC
WHIRLPOOL
