5. If your model does not have a lock, remove the door hinge
hole plug and move it to the opposite side as shown.
Reverse the Door Swing
NOTE: If your model has a lock, see ?Reverse the Lock.?
WARNING1
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
1.Doorhingeholeplug
TOOLS NEEDED: uD?? in. nut driver, flat-blade screwdriver, flat
2 in. putty knifeRemove the Door - Style 2
IMPORTANT:
1. Unplug refrigerator or disconnect power.
Before you begin, turn the refrigerator control OFF. Unplug
refrigerator or disconnect power. Remove food and2. Remove the cabinet cover by lifting up at the back and pulling
adjustable door bins or can racks from the door.the cabinet cover forward to release it from the top hinge and
cabinet cover support bracket.
Do not lay the refrigerator down while you reverse the door
swing. See ?Unpack the Refrigerator.?
Remove the Door - Style 11
1. Unplug refrigerator or disconnect power.2
2. Use the 2 in. putty knife to pry up the hinge cover. Remove1.Cabinetcover
the hinge cover by lifting it up from the back.2.Backofrefrigerator
3. Remove the uD?? in. screws from the top hinge. Keep all parts1
together.
1
1.Hingecover2
3. Remove the uD?? in. screws from the top hinge. Keep all parts
3
together.
NOTE: If your model has a lock, see ?Reverse the Lock.?
1.uD?? in.screws
2.Tophinge
3.Shim
4. Remove the cabinet cover support bracket. Keep all parts
1
together.
2
3
1
1.uD?? in.screws
2.Tophinge2
3.Shim
3
4. Lift the door up and off of the bottom hinge.
1.uD?? in.screws
2.Cabinetcoversupport
bracket
3.Shim
5. Lift the door up and off of the bottom hinge.
5 |