If you are using dishwasher detergent that already contains
rinse aid, the detergent including the rinse aid must be
placed in the detergent compartment.
In this case the rinse aid inflow must be deactivated, in
order to avoid a double dosage.
Deactivation/activation of the inflow of
rinse aid
(The dishwasher must be switched off)
When the inflow of rinse aid has been deactivated, also
the rinse aid indicator light on the control panel is
automatically deactivated.
1.Press the On/Off push button. The indicator light of the
programme selection push button will illuminate and in the
digital display are visible 2 horizontal lines (--) (setting
mode).
If in the digital display are not visible the 2 horizontal lines,
this means that a washing programme has been selected.
The programme must be cancelled.
Press the push button Cancelfor about 3 seconds.
The indicator light of the programme selection push button
will illuminate and in the digital display will appear 2
horizontal lines, this means that the selected washing
programme has been cancelled and the machine is now in
setting mode.
2.Press simultaneously function push buttons 2 and 3, the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3.Press the function push button 2, the indicator lights of
function push buttons 1 and 3 turn off while the indicator
light of the push button 2 goes on flashing, the digital
Inflow of rinse aid deactivated
Inflow of rinse aid activated (factory setting)
display indicates the current setting.
4.To change the setting, press again the function push button
2, the digital display indicates the new setting.
5.To memorise the operation, switch off the dishwasher by
pressing the On/Off push button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
29 |