Style 2 - Contoured
Reverse Doors (optional)Graphics follow these instructions.
IMPORTANT: If you want to reverse your doors so that they open
in the opposite direction, follow these steps. If you are not
reversing the doors, see ?Replace Doors and Hinges.?
Round-HeadDoor HandleDoor Hinge
Handle ScrewScrew Hole PlugHole Plug
Style 1 - Standard
Graphics follow these instructions. Cabinet
1. Remove uD??" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown. See Door Stop ScrewDoor Hinge Hole Plug
Graphic 1-2.
Doors
Door Handle Sealing ScrewCabinet Hinge Hole Plug
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side as shown. See Graphic 2.
2. Remove door stop from both the freezer and refrigerator
doors and move to the other side. See Graphic 3.Flat-Head Handle ScrewDoor Handle Screw Cover
Replace Doors and Hinges
Door Handle Seal Screw Front Round-Head Handle Screw
NOTE: Graphic may be reversed if door swing is reversed.
Cabinet
1. Replace the parts for the bottom hinge as shown. Tighten
1. Remove uD??" hex-head hinge screws from handle side and screws. Replace the refrigerator door.
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from cabinet top and NOTE: Provide additional support for the doors while the
move them to opposite side hinge holes as shown. hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
See Graphic 1-2.
Freezer door2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
1. Remove freezer handle assembly as shown. Keep all parts door.
together. See Graphic 2.3. Assemble the parts for the top hinge as shown. See Top
2. Remove door hinge hole plug. Move to opposite side as
shown. See Graphic 3.Hinge graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door
3. Remove door handle sealing screws. Move to opposite side aligns evenly with the top of the refrigerator door. Tighten all
of freezer door as shown. See Graphic 4.screws.
4. Remove door stop. Move to opposite side of freezer door as
shown. See Graphic 5. Final Steps
5. Position freezer handle on opposite side of freezer door.
Assemble handle on door as shown. See Graphic 2.1. Check all holes to make sure that hole plugs and screws are
6. Tighten all screws. Set aside door until hinges and in place. Reinstall top hinge cover. See Top Hinge graphic.
refrigerator compartment door are in place.
Refrigerator doorWARNING
1. Remove the screw cover. See Graphic 6.
2. Remove refrigerator handle assembly as shown. Keep all
parts together. See Graphic 6.
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown. See Graphic 3.
4. Remove door handle sealing screws. Move to opposite side
of refrigerator door as shown. See Graphic 4.Electrical Shock Hazard
5. Remove door handle seal screw front. Move to opposite side Plug into a grounded 3 prong outlet.
of refrigerator door as shown. See Graphic 7.
6. Remove door stop. Move to opposite side of refrigerator door Do not remove ground prong.
as shown. See Graphic 5.
Do not use an adapter.
7. Position refrigerator handle on opposite side of the
refrigerator door as shown. See Graphic 6. Drive top two Do not use an extension cord.
screws in handle first. Align lower portion of handle and drive Failure to follow these instructions can result in death,
bottom screw.
fire, or electrical shock.
8. Replace screw cover. See Graphic 6.
9. Tighten all screws. Set aside refrigerator door until bottom
2. Plug in refrigerator or reconnect power.
hinge is installed on refrigerator.
3. Reset the controls. See ?Using the Controls.?
4. Return all removable door parts to doors and food to
refrigerator.
7 |
ACEC
WHIRLPOOL
