Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use To remove glass shelves:
your refrigerator. Glass shelves are strong enough to 1. Tilt up at front.
hold bottles, milk and other heavy food items, 2. Lift up at back.
3. Pull shelf straight out,
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
Gloss shelves ore 2. Ilt up front of shelf until hooks drop into slot. Lower
heovy Be careful. front of shelf to level position.
The meat pan can be taken out and moved the Removlng:
same way as the shelves. Remove the meat pan first. I, Slide the meat Dan out to stoo.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaclng:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop into slots.
Lower front of cover to level position.
3. Replace meat pan in reverse order.
Removing the crispers and crisper covers...
Removing:
1. Slide crisper and meat pan straight out
2. Lift the front
3. Slide the rest of the way out.
4. Replace in reverse order
Replacing:
Covers are held in place by two pegs at the back
and two notched tabs in front. Snap Back Into Place.
1. Press front tabs out of the way. If necessary, the center leg can be made shorter or
2 Lift cover front longer to help level the crisper covers Turn the leg
3. Lift back off the pegs. clockwise to make it longer.Turn the leg counterclock-
4. Replace in reverse order. wise to shorten it
.._ , , _,._ ..,. i,_. _-rl_
Changing the light bulb...
Unplug the refrigerator first.
1. Reach behind control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb,
Removing the freezer shelf. . . ,,
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order
Lift the Front
Then the Back
6 |
ACEC
WHIRLPOOL
