Refrigerator door
Replace Doors and Hinges (all models)
1. Remove refrigerator handle bottom trim. For Style 1, remove
the handle screw cover. See Graphic 6-1. For Style 2, slide
trim down as shown in Graphic 6-2.NOTE: Graphic may be reversed if door swing is reversed.
2. Remove the refrigerator handle assembly as shown. Keep all 1. Replace the parts for the bottom hinge as shown and tighten
parts together. See Graphic 6-3.screws. See Bottom Hinge graphic. Replace the refrigerator
door.
3. Remove the door hinge hole plug from refrigerator door. Move
it to the opposite side hinge hole as shown in Graphic 3.NOTE: Provide additional support for the doors while the
4. Remove the door handle sealing screws. Move them to the hinges are being moved. Do not depend on the door magnets
opposite side of the refrigerator door as shown in Graphic 4.to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
5. Remove the door handle seal screw front. Move it to the
opposite side of the refrigerator door as shown in Graphic 7.all screws. See Center Hinge graphic. Replace the freezer
6. Remove the door stop. Move it to the opposite side of the door.
refrigerator door as shown in Graphic 5. 3. Assemble the parts of the top hinge as shown in the Top
Hinge graphic. Do not tighten the screws completely.
7. Position the refrigerator handle on opposite side of the 4. Line up the doors so that the bottom of the freezer door aligns
refrigerator door as shown in Graphic 6-3. Drive the two top
screws in the handle first. Align the lower portion of the handle evenly with the top of the refrigerator door. Tighten all screws.
and drive the bottom screw.
8. Align refrigerator bottom trim. For Style 1, replace the door Final Steps (all models)
handle screw cover. See Graphic 6-1. For Style 2, slide trim 1. Check all the holes to make sure that hole plugs and screws
into place. See Graphic 6-2.are in place. Reinstall the top hinge cover as shown in the Top
9. Tighten all screws. Set aside refrigerator door until bottom Hinge graphic.
hinge is installed on product.
2. Replace the base grille. See Base Grille graphic.
Reverse Doors-Contour Door (optional)
WARNING
Cabinet
1. Remove the uD??" hex-head hinge screws from handle side and
move them to the opposite side. See Graphic 1-1.
2. Remove the cabinet hinge hole plugs from the cabinet top and
move them to the opposite side hinge holes as shown in
Graphic 1-2.
Doors
Electrical Shock Hazard
1. Remove the door hinge hole plugs from the top of the freezer
and refrigerator doors. Move them to the opposite side as Plug into a grounded 3 prong outlet.
shown in Graphic 3.
2. Remove the door stops from both the freezer and the Do not remove ground prong.
refrigerator doors and move them to the opposite side. See
Graphic 5.Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Plug into a grounded 3 prong outlet.
4. Reset the controls. See ?Using the Control(s).?
5. Return all removable door parts to doors and food to
refrigerator.
7 |
ACEC
WHIRLPOOL
