Operating Instructions
...problems occur during use of the dishwasher.
Malfunction Possible Cause Remedy
The door of the dishwasher is
Shut the door.
not closed properly.
Mains plug is not plugged in. Insert mains plug.
House fuse is defective. Replace fuse.
The programme does
Where dishes are to be
not start.
washed immediately, for
In the case of dishwasher
appliances
models with start delay
- with multidisplay, set the
timer:
delay start to 0.
A start delay is selected.
- without multidisplay, can-
cel the delay start timer.
The washing compartment is Only wash cutlery and dishes
made from rust-free stainless that are suitable for dish-
steel. Rust spots in the wash-washer use.
ing compartment are due to
Rust spots are visible in rust particles from external
the washing compart-sources (rust particles from
ment. water pipes, pans, cutlery,
Close the lid of the special
etc.). Remove such spots with
salt container securely.
one of the stainless steel
cleaners that are generally
available on the market.
There is a whistling The whistling is not a cause Use a different brand of
noise during washing. for concern. detergent.
...the wash results are not satisfactory.
The dishes are still dirty.
- The wrong wash programme was selected.
- The dishes were loaded is such a way that the wash waster did not
reach all items. The racks for the dishes must not be overloaded.
- The filter in the base of the washing compartment is dirty or incor-
rectly positioned.
- Detergent was not used or too little was used.
- In the case of scale deposits on the dishes: The special salt container
is empty or the water softener is incorrectly adjusted.
- The drain hose is incorrectly laid.
28 |
ACEC
AEG
