Operating instructions
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer?s visit is not free of
charge, even during the period of guarantee.
...Error Messages Are Displayed.
If the multi-display indicates the fault code (1 or (2, you can prob-
ably rectify the fault yourself. Following rectification of a (1 or (2
fault, press the button for the wash programme that has been
started. The wash programme continues. If the fault code is displayed
again, contact customer service.
For all other faults, please contact customer service, stating the fault
code.
Malfunction Possible Cause Remedy
The programme indica-Tap is closed. Open tap.
tor for the selected
The filter in the threaded Clean the filter in the
wash programme is
hose fitting is blocked. threaded hose fitting.
flashing and the Fault
code (1 is displayed on
the multi-display.:
The water inlet hose is not
there is no water run-Check hose installation.
correctly laid.
ning into the dish-
washer.
The programme indica-The siphon is blocked. Clean siphon.
tor for the selected
wash programme is
flashing and the Fault
The water drain hose is not
code (2 is displayed on Check hose installation.
correctly laid.
the multi-display.:
Fault code (3 is dis-
The leak prevention system Close the tap and contact
played on the multi-
has been triggered. customer service.
display.
28 |
ACEC
AEG
