10English
tri-scopic tube (specic types only)
1 Adjust the tube to the length you nd most comfortable during vacuum cleaning. Press one
of the two collars downwards and pull the tube part above the collar upwards or push it
downwards (Fig. 5)
nozzle
1 Connect the nozzle to the tube. (Fig. 6)
If you want the nozzle close at hand (e.g. to clean stairs, connect upholstery or tapestries),
the nozzle directly to the handgrip. (Fig. 7)
Prepare the vacuum cleaner for either dry or wet use.
Note:When you unpack the appliance, it is ready for wet use.
Preparing for dry use
Always remove the oat unit and the diffuser and insert the Micro Filter (specic types only) and
the paper or reusable dustbag before you vacuum dry substances.
1 Make sure the appliance is unplugged.
Turn the shampoo hose clockwise (1) and pull it out of the motor unit (2). (Fig. 8)
Remove the shampoo reservoir (Fig. 9)
4 Undo the clamps. (Fig. 10)
5 Lift the motor unit from the container by the handle. (Fig. 11)
6 Turn the motor unit upside down. (Fig. 12)
7 Remove the diffuser from the motor unit. (Fig. 13)
8 Remove the oat unit from the container. (Fig. 14)
9 Insert a paper dustbag or the reusable dustbag. Press and hold the red lever while you place
the front of the dustbag into the holder. (Fig. 15)
10 First insert the bottom edge (1). Then press the top edge into place (2). (Fig. 16)
Make sure that the two projections of the front point downwards and that the centre of the
bottom edge rests on the ridge of the holder.
11 Slide the holder with dustbag into the appliance in such a way that the holder is kept in place
by the two ridges in the container. (Fig. 17)
1 Put the motor unit back onto the appliance and close the clamps (click). (Fig. 18)
1 Put the Micro Filter into place (specic types only). (Fig. 19)
, See chapter Replacement for replacing the paper dustbag or chapter Cleaning for emptying
the reusable dustbag.
Preparing for wet use
Always remove the paper or reusable dustbag and the Micro Filter (specic types only) before wet
use.
Preparing for vacuuming liquids
To vacuum liquids, you need the oat unit and the diffuser.
1 Make sure the appliance is unplugged.
Undo the clamps. (Fig. 10)
Lift the motor unit from the container by the handle. (Fig. 11) |