button on that channel, thereby switching the output channel from the main bus
to the AUX bus.
STEREO LINKING - Input levels from each virtual software return are controlled by
software faders; pairs can be linked for stereo operation by clicking the channels
LINK button. The button turns blue when active. Once the channel is linked,
grabbing and moving one fader will move both faders in unison.
MUTE BUTTON - Selecting the MUTE button (the button turns red) will cause that
channel pair to cease audio output. Deselecting the MUTE button will resume
audio output on that channel pair.
SOLO BUTTON Selecting the SOLO button (the button turns yellow) will cause all
other channels to cease audio output; deselecting the SOLO button will resume
audio output on all channels. Multiple solo selections are possible.
PANNING - The analog and digital input channel pairs also offer virtual PAN pots.
As with any typical mixer, the PAN works in conjunction with the output assign
buttons to enable you to route the signal as you wish.
METERING - At the bottom of the MIXER PAGE, software level meters are provided
for each of the FireWire 410s five output buses, as well as the AUX BUS. This is
provided as a quick reference to whats going on in the Output page.
Output Page
The OUTPUT page provides you with control over each of the FireWire 410s
analog and digital outputs, as well as that of the AUX BUS and HEADPHONES Bus.
OUTPUT CHANNELS Virtual FADERS control the individual channel output levels.
The output faders correspond to their respective analog and digital (hardware)
outputs. When the MAIN/AUX button is set to MAIN, the OUTPUT CHANNEL gets
its signal from the bus assignments selected on the MIXER PAGE. (See MAIN/AUX
BUTTON, below.)
BALANCE CONTROLS The BAL control allows you to adjust the balance of the
associated pairs stereo output.
25 |
ACEC
M-AUDIO
