Electrical Connection
WARNINGIf you fit your own plug, the colours of the wires in the
mains lead of your appliance, may not correspondTHIS APPLIANCE MUST BE EARTHED.
with the markings identifying the terminals in yourThe manufacturer declines any liability
plug, proceed as follows:
should this safety measure not be
observed.Connect the Green and the Yellow (earth) wire to the
terminal in the plug which is marked with the letter
If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and�EE or the earth symbol , or coloured green and
the appropriate plug fitted.yellow.
Connect the blue (neutral) wire to the terminal in the
Remove the fuse from the cut off plug.
plug which is marked with the letter �NE or colouredThe cut off plug should then be disposed of to
black.prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of yourConnect the brown (live) wire to the terminal in the
home.plug which is marked with the letter �LE or coloured
red.
Important
The plug moulded onto the lead incorporates a fuse.The wires in the mains lead are coloured in
For replacement, use a 13amp BS1362 fuse. Onlyaccordance with the following code:
ASTA or BSI approved fuses should be used.
Green and Yellow - Earth
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the colouredBlue- Neutral
Brown- Liveinsert at the base of the plug.
A replacement cover/carrier must be obtained from
GREEN & YELLOWyour local Service Force Centre.13 AMP. FUSE
This appliance complies with the following E.E.C.
Directive:
-73/23 EEC of 19.2.73 (Low Voltage
13 AMPDirective) and subsequent amendments.
- 87/308 of 2.6.87 (Radio Interference
Suppression) and subsequent amendments.
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequentBROWN
BLUE
CORD CLAMPamendments.D207
Please ensure that when the appliance is
installed it is easily accessible for the engineer in
the event of breakdown.
12 |
ACEC
OTHERS
