V-Accordion r
Connection panel
Connection panel
PQ
RS
PDC IN socketSPHONES socket
This is where you need to connect the supplied power This is where you can connect stereo headphones
adapter (PSB-4U). Note that you can also purchase (Roland RH-25, RH-50 or RH-200). On the FR-3s/
10 optional batteries and use the FR-3 without the FR-3sb, connecting a pair of headphones mutes the
adapter. internal speakers.
QMIDI OUT/IN socket
This socket can be used to receive or transmit MIDI Important remark
data. Its function depends on the setting of the MId
After connecting any cable to the FR-3, be sure to never
parameter (see p. 48).place it on the side when not using it.
ROUTPUT L/MONO (TREBLE) & R/MONO (BASS) sockets" Always stand the V-Accordion on its rubber feet (and in
These sockets can be connected to an amplifier, a
the corresponding direction) to avoid damaging the
mixing console or a wireless system. If you use both plugs.
connectors, the FR-3s output is stereo. In that case
" Always handle and move the FR-3 with care and pay
the signals of the Treble section is transmitted to the special attention to the cable slack to avoid damaging
L/MONO socket, while the R/MONO socket transmits
or bending the cables.
the bass (and chord) signal. If you only use one jack " If you place the FR-3 on your lap, ensure that the audio
(connected to the L or R socket), the FR-3s output
and adapter cables run between your legs (not side-
is mono.
ways) to avoid damaging or bending the cables.
Note: On the FR-3s/FR-3sb, connecting jacks to these sockets
does not mute the internal speakers.
13 |
ACEC
ROLAND
