Shot of steam 9When you have finished ironing
Shot of steam is a powerful steam output to remove- Switch the appliance off by setting the on/off switch
stubborn wrinkles.This facility can only be used duringto �offO (fig.10).
steam-ironing.- Release the pressure in the steam tank by pressing
- Always set the temperature control (I) to a settingthe steam activator button until you no longer hear
within the steam range (up to MAX),otherwise theany steam escaping from the appliance.
soleplate will not be hot enough and drops of water- Then remove the plug from the wall socket.
will escape from it.- Put the iron on its heel or on the iron stand (C) and
- Press the �Shot of steamO button 9 (K) and theallow it to cool down sufficiently before you move it
steam activator button (H) (fig.6).or put it away.
Steam spray T
This facility will help remove stubborn wrinkles.It canCleaning
only be used during steam-ironing.
Y It is not necessary to set the temperature control- Remove the plug from the wall socket and allow the
(I) to the steam range if you want to use the appliance to cool down sufficiently before you start
Shot-of-steam facility.cleaning it.
- Press the Steam spray button T (J) and the steam
activator button (H) (fig.7).Iron
- You can clean the iron with a damp cloth.
Steaming in vertical positionY Never immerse the iron in water nor rinse it
Hanging curtains and clothes (jackets,suits,coats) canunder the tap.
be steam-ironed by holding the iron in vertical position- Scale and other deposits can be wiped off the
(fig.8).You can also use the Shot-of-steam and Steamsoleplate with a damp cloth.
spray facilities for vertical steam-ironing.
Steam tank
Clean the steam tank after every 10 times of use.
Ironing without steam- Carefully remove the cap.
- Rinse the steam tank only with 500 ml of fresh
- Put the iron on its heel or on the iron stand (C).water.Pour out the water by holding the steam tank
Y Make sure switch (D) has been set to �offO.over the sink upside down.
- Set the desired ironing temperature by means to- Screw the cap firmly back onto the steam tank.
the temperature control (I) (fig.9).
- Put the plug in the wall socket,switch D to �onO and
let the appliance heat up.
- Wait until the pilot light (G) has gone out for the
second time before you start ironing.
Y If you press the steam button by accident when you
are ironing,some steam will escape.In case the tank
is empty or not heated up yet,a clicking sound will
come from the water tank.This phenomenon,
caused by the opening of the steam valve,is
harmless.
Y If you have been ironing at a high temperature and
subsequently set the temperature control (I) to a
lower setting,wait until the temperature pilot light
(G) goes on again before you continue ironing.
This will prevent damage to fabrics.
Anti-calc funnel
Type GC6007 comes with an anti-calc funnel to
prolong the life of the appliance.Use the anti-calc
funnel when you fill the steam tank.
7 |
ACEC
PHILIPS
