4gb94603.fm Page 16 Wednesday, October 1, 2003 12:27 PM
How to fill the salt container
From a water hardness category Setting the correct water
of 1-2 (medium), before using hardness level:
the dishwasher for the first Set the water hardness by
time, fill the salt container with turning the selector inside the
regeneration salt (to find out salt container.
the hardness level of water in
Use the table below to set the
your area, contact your local
dial to the correct setting:
Water Board or check the last
bill you received).
If the water hardness level does
not correspond to position 3 on
the selector (setting on
delivery) or if the water
hardness level changes:
HardnessGerman Frenchmmol/lClarke scale or SettingIf the water hardness level
leveldegrees degreesEnglish degreesfalls within category 1 (soft),
°dH °fH°eHno salt is required.
1 soft0 - 4 0 - 70 - 0,70 - 5,01
1 - 2 medium5 - 98 - 150,9 - 1,66,3 - 11,31
2 average10 - 2216 - 301,8 - 4,012,5 - 27,52
3 medium-
23 - 2931 - 454,1 - 5,228,8 - 36,33
hard
4 hard30 - 3546 - 605,4 - 6,337,5 - 43,84
5 extremely
36 - 4161 - 806,5 - 7,445,0 - 51,35
hard
How to fill the salt container4.Fill the salt container with
Warning: only use regeneration salt to the rim
regeneration salts for use (using the funnel provided)
domestic dishwashers!(when filling for the first time
Do not fill the salt container min. 1.5 kg and max. 1.7 kg)
with unsuitable substances, and stir with a spoon handle.
such as detergent, as this will 5.Screw the cap back on by
cause irreparable damage to turning it clockwise.
the water softener system.6.Fit the lower rack.
7.If regeneration salt is to be
1.Remove the lower rack.
added, immediately start a
2.Unscrew the cap by turning
wash programme (rinsing
it counter-clockwise.
alone is not sufficient) in
3.When first using the order to eliminate any
dishwasher: fill the salt residual saline solution
container to the rim with straight away and avoid
water.corrosion.
Salt level indicatorVisual indicator
The dishwasher is equipped The float is clearly visible in the
with an electric or visual salt cap window when the salt
level indicator (depending on container is full (see photo).
the model installed).The float lowers and is no longer
Electric indicatorvisible when the salt container is
The salt level indicator lamp on empty.
the control panel lights up when
the salt container is empty.
16
Black process 45.0° 100.0 LPI |
ACEC
BAUKNECHT
