USER?S G U IDESAESx4CLKx6GENx6GENx6-96
Digital Audio Distribution Products
GENx6Word/Superclock Generator
Descriptionno audio data).
The GENx6 is used to distribute word clock and super clock,POWER: Supplied by external Lucid PS-3, PS-3E, or PS-3J.
and also act as a generator device with its internal 2 clocks. ItWORD/SUPER CLOCK OUTPUTS are coaxial BNC connec-
provides 6 clock outputs that may be internally generated totors, with nominal source impedance of 20 Ohms.
either word or super clock, or clocked from an external
Jumper Settings
source. The device can also synthesize a word clock or super
? J3 with positions HIGH or LOW determines the WORD
clock output derived from the word clock, super clock or AES
CLOCK input range.The HIGH range (default) accepts word
input.
clock frequencies between 44.1 kHz and 96 kHz whereas the
Controls
LOW range accepts word clock frequencies between 32 kHz
The GENx6 has 3 switches located on its front panel.
and 48 kHz.
? One 3-way toggle switch selects between internal 44.1 kHz
? J5 sets the WORD CLOCK input to either TERMINATED or
sample rate, internal 48 kHz sample rate, or external sample
OPEN (default). If the jumper is set to TERMINATED, the
rate.
? One 3-way toggle switch selects between the external syncdriver?s source impedance should be 75 Ohms to match the
sources of AES, WORD, or SUPER(256X) clocks.GENx6 ?s BNC input impedance.
? One 2-way toggle switch determines if the output is WORD
Specifications
CLOCK (x1 sample rate) or SUPER CLOCK (256 x sample
Electrical
rate).
Input impedance: AES:110 Ohms; Clock: 75 Ohms or Hi-Z,
LEDS
jumper selectable.
3 LOCK LEDs (a stack of 3):
Output impedance: 20 Ohms
? The upper LOCK LED, labeled AES, indicates the AES input
External sync range: 32 kHz to 96 kHz
PLL has locked to an AES3 or AES11 input.
Internal sample rates: 44.1 kHz, 48 kHz
? The middle LOCK LED, labeled WORD, indicates the word-
clock PLL has locked to a word clock input.Connectors
? The bottom LOCK LED, labeled SUPER(256X), indicates theAES input: Balanced XLR3
input PLL has locked to a super clock input.
WORD/SUPER CLOCK INPUT: BNC
POWER LED indicates AC power is present.WORD/SUPER CLOCK OUTPUTS: 6 x BNC
ConnectorsPower supply: External AC (Lucid PS-3, PS-3E, or PS-3J)
using 7-pin DIN connector
WORD/SUPER CLOCK INPUT is a coaxial BNC female con-
nector with nominal input impedance of 75 Ohms. Internal ter-Physical
mination is provided with a jumper.
1/2 U Chassis (HxWxD): 1.72 in.x 8.5 in.x 8 in. (4.37 cm x 21.59
AES INPUT is a 3-pin XLR connector with nominal input imped-cm x 20.32 cm)
ance of 110 Ohms.Internal termination is provided, as per the
Net Weight: 2.5 lb (1.1 kg)
AES3 spec. The data can be either AES3 or AES11 (AES3 with
WORD/SUPERCLOCKGENERATOR
LOCK
EXTERNALSOURCEOUTPUT
AES
WORD44.1
WORD
48
SUPER(256X)EXTSUPERPOWER
WWW.LUCIDAUDIO.COMWORD/SUPERAES INPUT
MANUFACTUREDBYLUCID
LYNNWOOD,WA,USACLOCK
FABRIQUEPARLUCIDWORD/SUPER CLOCK OUTPUTSINPUT
CONNECTTO
LUCID
PS-3ORPS-3E
POWER
SUPPLYONLY
THISPRODUCTCONTAINSNOUSERSERVICEABLEPARTS
PASDESELEMENTSSERVIABLEPARUTILISATEUR
Page 5 of 9 |
ACEC
OTHERS
