PRECAUTIONS
Y Do not attempt to disassemble the camera.Y How to take care of this camera.
To prevent electric shock, do not remove screws or cover.After turning OFF the DC power switch, clean it with a dry
There are no user-serviceable parts inside. Refer servicingcloth. If it is difficult to remove the dirt or dust, clean it up
to qualified service personnel.with a cloth applied the neutral cleanser.
Use the lens cleaning tissue paper(may be available at
your local camera store) for lens cleaning.
Y Do not expose the camera or camera control unit to rain or
moisture, or do not try to operate it in wet areas.
Do take immediate action if ever the camera or cameraY Connect this to a DC 12 V, min. 600 mA CLASS 2 Power
control unit do become wet. Turn power off and refer ser-supply only.
vicing to qualified service personnel.
Moisture can damage the camera and camera control unit
and also create the danger of electric shock.
Y After using the camera, turn OFF the DC power switch and
put the lens cap on the camera head.
Y Ambient Temperature range
Do not install the camera in the place which is beyond
10 !C to 45 !C {50 !F to 113 !F}.Y Every necessary procedures with regard to install this
product should be made by qualified service personnel or
system installers.
Y Do not drop anything inside the camera.
Dropping metal for example inside the camera could per-
manently damage the unit.
Caution:
Y Never crush or pinch the camera cable.Connecting or disconnecting camera cable to/from the cam-
Do not bend the camera cable into a curve whose radiusera control unit must be done after turning OFF the DC
is too small.power switch. Otherwise, the camera head may be dam-
aged.
Y Whether the camera is in use or not, never face it toward
the sun.
Do use caution when operating the camera in the vicinity
of spot lights or other lights and light reflecting objects.
Y Do not loosen the chassis of the camera head.
Y Do not connect Panasonic GP-KS162CU and GP-KS822H,
nor GP-KS822CU and GP-KS162H.
-6- |
ACEC
PANASONIC
