8 ENGETTING STARTED (cont.)
Tape Length SettingTAPE 30Y45Y60
tape lengthSet the tape length according to the length of the tape
select buttonused.
SET TAPE LENGTH
Press TAPE 30Y45Y60 until the required indication
1appears in the veiwfinder. T30 = 30 minutes of
recording time, T45 = 45 minutes, and T60 = 60
minutes.
NOTE:
The tape remaining time (Z pg. 10) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
Set POWER to OCAMERA�.
T30T30T45T60
Tape length indicator
Loading/Unloading A Cassette
OPEN CASSETTE HOLDER
Slide EJECT until the holder opens. Do not use force
1to open.
INSERT/REMOVE CASSETTE
Make sure the label is facing outward.
2
CLOSE CASSETTE HOLDER
Press PUSH and make sure the holder is closed and
3locked.
NOTES:
Turn to takecA cassette holder canOt be opened unless a power
up slack.supply is attached.
cMake sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
Erase ProtectionGearcassette in the direction of the arrow to take up the
slack.
cMake sure the Erase Protection tab is in the position
that allows recording. If not, slide the tab. Some
cassettes have removable tabs. If the tab has been
removed, cover the hole with adhesive tape.
cThe cassette holder canOt be opened while the
camcorder is in the record mode. |
ACEC
JVC
