39
Main UnitAbout moisture condensation . . .
YYou have observed that pouring a cold liquid into
1. For safety, DO NOT . . .a glass will cause drops of water to form on the
.... open the camcorderOs chassis.glass� outer surface. This same phenomenon
.... disassemble or modify the unit.occurs on the head drum of a camcorder when it
.... short-circuit the terminals of the battery pack.is moved from a cool place to a warm place, after
Keep it away from metallic objects when not inheating a cold room, under extremely humid
use.conditions or in a place directly subjected to the
.... allow inflammables, water or metallic objects tocool air from an air conditioner.
enter the unit.YMoisture on the head drum can cause severe
.... remove the battery pack or disconnect thedamage to the video tape, and can lead to internal
power supply while the power is on.damage to the camcorder itself.
.... leave the battery pack attached when the
camcorder is not in use.Serious malfunctioning
2. Avoid using the unit . . .If malfunctioning occurs, stop using the unit
.... in places subject to excessive humidity or dust.
.... in places subject to soot or steam such as near aimmediately and consult your local JVC dealer.
cooking stove.
.... in places subject to excessive shock or
vibration.
.... near a television set.For Your Maintenance
.... near appliances generating strong magnetic or1. After Use
electric fields (speakers, broadcasting antennas,1Set the power switch to POWER OFF to turn
etc.).off the camcorder.
.... in places subject to extremely high (over 40!C)2Slide EJECT to open the cassette holder, then
or extremely low (under 0!C) temperatures.remove the cassette.
3. DO NOT leave the unit . . .3Close and lock the cassette holder by pressing
PUSH.
.... in places of over 50!C.4Press BATT. RELEASE to remove the battery
.... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).pack.
.... in direct sunlight.5Slide the LENS COVER open/close switch to
close the lens cover.
.... in a closed car in summer.
.... near a heater.2. Cleaning The Camcorder
1CLEAN EXTERIOR
4. To protect the unit, DO NOT . . .Wipe gently with a soft cloth.
.... allow it to become wet.
.... drop the unit or strike it against hard objects.2CLEAN LENS
.... subject it to shock or excessive vibration duringBlow it with a blower brush, then wipe gently
with lens cleaning paper.
transportation.3REMOVE EYEPIECE
.... keep the lens directed at extremely bright
objects for long periods.Turn the eyepiece counterclockwise and pull
.... direct the eyepiece of the viewfinder at the sun.it out.
4CLEAN VIEWFINDER
.... carry it by holding the viewfinder.Remove dust using a blower brush.
.... swing it excessively when using the shoulder
strap.5RE-ATTACH EYEPIECE
Align the marks, re-attach the eyepiece and
5. This camcorder features a built-in headturn it clockwise.
cleaner which automatically cleans the
heads and head drum when a cassette isNOTES:
loaded or unloaded. If, however, the headscAvoid using strong cleaning agents such as
become dirty and cause blurriness orbenzine or alcohol.
interruption in the playback picture,cCleaning should be done only after the battery
consult your nearest JVC dealer.pack has been removed or other power units have
been disconnected.
cMold may form if the lens is left dirty. |
ACEC
JVC
