MasterPage: Left
GR-DX317PAL.book Page 10 Friday, March 5, 2004 12:52 PM
GETTING STARTED10 EN
How To Attach The Lens CapHow To Attach The Core Filter (for USB Cable and
To protect the lens, attach the Audio Extension Cable)
provided lens cap to the
Attach the core filters to the cables. The core filter
camcorder as shown in the
reduces interference.
illustration.
1Release the stoppers on both ends of the core filter.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is flush
to the camcorder.
Stopper
2Run the cable through the core filter, leaving approx.
3 cm of cable between the cable plug and the core filter.
USB cable
Wind the cable once around the outside of the core filter
as shown in the illustration.
3 cmCore filter (large)
Place here during shooting.
Wind once.
Audio Extension cable
Wind the cable twice around the outside of the core filter
How To Use The Audio Extension Cable
as shown in the illustration.
When using an optional Core filter (small)
3 cm
external microphone,
connect to the provided
Open the cover.
Audio extension cable
(with a core filter To MIC
attached), then connect
the Audio extension Audio extension cable
cable to the camcorder. (provided)Wind twice.
The core filter reduces I Wind the cable so that it is not slack.
interference. (See the Core filter
3Close the core filter until it clicks shut.
right column.)
USB cableAudio Extension cable
Stereo microphone
NOTES:
I Take care not to damage the cable.
I When connecting a cable, attach the end with the core filter
to the camcorder. |
ACEC
JVC
