USER MAINTENANCE
84 EN
After UseCleaning The Camcorder
Turn off the camcorder.To clean the exterior, wipe gently with a soft
11cloth.
Put the cloth in diluted mild soap and wring it
Slide down and hold OPEN/EJECT in thewell to wipe off heavy dirt. Then wipe again
2direction of the arrow, then pull the cassettewith a dry cloth.
holder cover open until it locks. The cassette
holder opens automatically. Remove theOpen the LCD monitor. Wipe gently with a soft
cassette.2cloth. Be careful not to damage the monitor.
Close the LCD monitor.
Press OPUSH HERE� to close the cassette holder.
3YOnce the cassette holder is closed, it recedesTo clean the lens, blow it with a blower brush,
automatically. Wait until it recedes completely3then wipe gently with lens cleaning paper.
before closing the cassette holder cover.
Pull out the viewfinder fully.
Slide down BATT. RELEASE 1 and remove the4
4battery pack 2 3.
Open the viewfinder cleaning hatch in the
5direction of the arrow 1 .
Cassette holderInsert a lens blower or soft cloth into the gap at
the side of the viewfinder and clean the interior
of the viewfinder with it 2 .
Close the hatch until it locks in place and push
6the viewfinder back in.
Remove.
NOTES:
IAvoid using strong cleaning agents such as benzine
or alcohol.
ICleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
IMould may form if the lens is left dirty.
PUSH HERE
OPEN/EJECT SwitchIWhen using a cleaner or chemically treated cloth
refer to the cautions of each product.
HatchLens blower
2
1
BATT. RELEASE Switch |
ACEC
JVC
