8. Remove the parts for the bottom hinge as shown in the 9. Tighten all screws. Set aside refrigerator door until bottom
Bottom Hinge graphic.hinge is installed on product.
IMPORTANT: If you want to reverse your doors so that they
open in the opposite direction, follow these steps. If you are Style 2 - Contour
not reversing the doors, see ?Door and hinge replacement?. (Graphics follow these instructions.)
Door reversal (optional)
Style 1 - Standard
(Graphics follow these instructions.)
Cabinet
1. Remove uD?? in. hex head hinge screws from handle side and
Door Stop ScrewDoor Hinge Hole Plug
move them to opposite side (see Graphic 1-1).
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown (see
Door Handle Sealing Screw Cabinet Hinge Hole Plug
Graphic 1-2).
Doors
1. Remove door hinge hole plug from top of freezer door. Move
Flat-Head Handle Screw Door Handle Screw Cover
to opposite side as shown (see Graphic 2).
2. Remove door stop from both the freezer and refrigerator door
(see Graphic 3).
Door Handle Seal Screw Front Round-Head Handle Screw
NOTE: When reversing the door, the freezer handle
becomes the refrigerator door handle and the refrigerator
Cabinetdoor handle becomes the freezer handle (see Door
1. Remove uD?? in. hex head hinge screws from handle side and Handle Reversal graphic).
move them to opposite side (see Graphic 1-1).
3. Remove freezer handle assembly as shown. Keep all parts
2. Remove cabinet hinge hole plugs from cabinet top and move together (see Graphic 4).
them to opposite side hinge holes as shown (see
4. Remove refrigerator handle assembly as shown. Keep all
Graphic 1-2).
parts together (see Graphic 5).
Freezer door
5. Rotate and position handle from refrigerator door onto freezer
1. Remove freezer handle assembly as shown. Keep all parts door and assemble as shown (see Graphic 6).
together (see Graphic 2).
6. Rotate and position handle from freezer door onto refrigerator
2. Remove door hinge hole plug. Move to opposite side as door and assemble as shown (see Graphic 7).
shown (see Graphic 3).
7. Reinstall door stops to opposite side (see Graphic 8).
3. Remove door handle sealing screws. Move to opposite side
of freezer door as shown (see Graphic 4).Door and hinge replacement
4. Remove door stop. Move to opposite side of freezer door as NOTE: Graphic may be reversed if door swing is reversed.
shown (see Graphic 5). 1. Replace the parts for the bottom hinge as shown. Tighten
5. Position freezer handle on opposite side of freezer door. screws.
Assemble handles on door as shown (see Graphic 2).
2. Replace the refrigerator door.
6. Tighten all screws. Set aside door until hinges and NOTE: Provide additional support for the doors while the
refrigerator compartment door are in place.
hinges are being moved. Do not depend on the door magnets
Refrigerator doorto hold the doors in place while you are working.
1. Remove refrigerator handle bottom trim. For Style 1, remove 3. Assemble the parts for the center hinge as shown and tighten
the handle screw cover (see Graphic 6-1). For Style 2, slide all screws (see Center Hinge graphic).
trim down as shown (see Graphic 6-2).
4. Replace the freezer door.
2. Remove refrigerator handle assembly as shown. Keep all
5. Assemble the parts for the top hinge as shown (see Top
parts together (see Graphic 6-3).
Hinge graphic). Do not tighten screws completely.
3. Remove door hinge hole plug from refrigerator door. Move to
6. Line up the doors so that the bottom of the freezer door
opposite side hinge hole as shown (see Graphic 3).
aligns evenly with the top of the refrigerator door. Tighten all
4. Remove door handle sealing screws. Move to opposite side screws.
of refrigerator door as shown (see Graphic 4).
Final Steps
5. Remove door handle seal screw front. Move to opposite side
1. Check all holes to make sure that hole plugs and screws are
of refrigerator door as shown (see Graphic 7).
in place. Reinstall top hinge cover (see Top Hinge graphic).
6. Remove door stop. Move to opposite side of refrigerator door
2. Replace the base grille (see Base Grille graphic).
as shown (see Graphic 5).
3. Plug in refrigerator or reconnect power.
7. Position refrigerator handle on opposite side of the
4. Reset the controls (see ?Setting the Controls? section).
refrigerator door as shown (see Graphic 6-3). Drive top two
screws in handle first. Align lower portion of handle and drive 5. Return all removable door parts to doors and food to product.
bottom screw.
8. Align refrigerator bottom trim. For Style 1, replace the door
handle screw cover (see Graphic 6-1). For Style 2, slide trim
into place (see Graphic 6-2).
7 |
ACEC
WHIRLPOOL
