Alignment and Adjustments
2-7-2 Convergence Adjustment
Caution<Cautions regarding Automatic Color Adjustment>
1. This model employs the Automatic Color Adjustment function to prevent distortion
of the Convergence by the earthOs magnetic field. For it to function properly, the
Convergence should be precisely adjusted.
2. The Screen Jig should be used for precise adjustment, so it does not escape the
sensorOs detection area. Sensors are on the center of each of the 4 faces.
3. Adjustment should be precise, otherwise an Automatic Color Adjustment
error occurs.
1. Aging the TV over 30 minutes is required.
2. Apply the NTSC input signal from the antenna or other external input source.
CautionBefore adjusting the Green, Red and Blue patterns, adjust the DY of the CRT to avoid
having a tilted center line.
3. Press Mute, 1, 8, and 3 (on the remote control) sequentially to enter Convergence Mode. The Test Pattern
is displayed.
MUTE
S.MODE
CautionIf an OSD (On-Screen Display) appears during the process, press the key to exit
Convergence mode and then re-enter Convergence mode.
2-22Samsung Electronics |
ACEC
SAMSUNG
