HCD-S550/S880
2-7. Disc Check Memory3. MECHA AGING
On the Test Mode Menu screen, selecting [3] executes the aging of
Disc Check Memorythe mechanism deck.
1. SL Disc check
2. SL Disc check### Aging Test MENU ###
3. SL Disc check
Operation Menu
1. Open/Close Test
Exit: RETURN
On this screen, measure the mirror time of chucked disc, and write
to the EEPROM.Exit: RETURN
2-8. Error Rate Display1) On the Aging Test MENU screen, pr[1] keess the y on the
remote commander to display the Open/Close Test screen.
Error Rate Display2) Insert discs and press the [ENTER] key on the remote
UCCR ADDcommander.
PI1 Err Now xx xxxx xxxxxxxx3) Is starts the aging.
Max xx xxxx xxxxxxxxDuring aging, the disc number, operating status and repeat cycle
Avg xx xxxx xxxxxxxxare displayed. Aging can be aborted at any time by pressing
PI2 Err Now xx xxxx xxxxxxxxthex key. After the operation is stoppedx ke, press theyor
Max xx xxxx xxxxxxxx[RETURN] key aging to return to the Aging Test MENU.
Avg xx xxxx xxxxxxxx
PO Err Now xx xxxx xxxxxxxx4. EMERGENCY HISTORY
Max xx xxxx xxxxxxxxOn the Test Mode Menu screen, selecting [4] displays the
Avg xx xxxx xxxxxxxxinformation such as servo emergency history.
The history information from last 1 up to 10 can be scrolled with
Exit: RETURNtheO keyor o key. Also, specific information can be displayed
by directly entering that number with ten keys.
On this screen, measure and display the error rate.
UC : Incorrect value### EMG. History ###
CR : Correct value
Add: Address Laser HoursCDxxxxhxxm
DVD xxxxhxxm
2-9. SACD Water Mark Check
SACD Water Mark Checka.bb xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
a.bb xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
PSP AMP
PSN
Select:1-9Scroll:UP/DOWN
(1.Latest EMG.)Exit: RETURN
xxxxhxxm: The laser on total hours. Data below minutes are
omitted.
a.: Error number.
bb: Error code.
Start: ENTERExit: RETURN
xx: Not used.
On this screen, measure the PSP AMP value and PSN value of SACDY Clearing History Information
water mark.Clearing laser hours:
Press the [DVD DISPLAY] and [CLEAR] keys in this order.
Then both CD and DVD data are cleared.
Clearing emergency history:
Press the [DVD TOP MENU] and [CLEAR] keys in this order.
Initializing set up data:
Press [DVD MENU] and [CLEAR] keys in this order.
The data have been initialized when OSet Up Initialized�
message is displayed. The EMG. History screen will be restored
soon.
25 |
ACEC
SONY
