3ENGLISHHD4659, HD4657, HD4653, HD4652, HD46504222 001 96601
Using the appliance.
1 Fill the kettle with water either through the spout or through the open lid
(fig. 3).
2 Close the lid.
Make sure that the lid is properly closed to prevent the kettle from boiling dry.
3 Place the kettle on its base, put the plug in the wall socket and set the on/off
switch to 'I' (fig. 4).
The kettle starts heating up.
� The kettle switches off ('O' position) automatically when the water has
reached boiling point.
� You can interrupt the boiling process by setting the on/off switch to 'O'.
Cleaning and descaling.
Always unplug the appliance before cleaning it.
Do not use any abrasive cleaning agents, scourers etc. to clean the kettle.
Never immerse the kettle or its base in water.
Cleaning the kettle
1 Clean the outside of the kettle with a soft, damp cloth moistened with warm
water and some mild cleaning agent.
Scale is not harmful to your health but it may give your drink a powdery taste. The
scale filter prevents scale particles from ending up in your drink. Clean the scale filter
regularly. Models with a Triple-action filter have also been equipped with a mesh that
attracts scale from the water.
2 The filter can be cleaned:
� by taking it out of the kettle and gently brushing the filter with a soft nylon
brush under a running tap, or.. (fig. 5).
� by leaving it in the kettle when descaling the whole appliance, or...
� in the dishwasher.
For models with a triple-action filter (HD4657, HD4653 and HD4652): the mesh can
be cleaned as follows:
� Remove the basket from the filter by sliding it out (fig. 6).
� Take the stainless steel mesh out of the basket and clean it by squeezing and
rotating it under a running tap.
Descaling the kettle
Regular descaling will prolong the life of the kettle.
In case of normal use (up to 5 times a day), the following descaling frequency is
recommended:
-Once every 3 months for soft water areas (up to 18 dH).
-Once every month for hard water areas (more than 18 dH).
1 Fill the kettle with water up to three-quarters of the maximum level and bring
the water to the boil.
2 After the kettle has switched off, add white vinegar (8% acetic acid) to the
maximum level.
3 Leave the solution in the kettle overnight.
4 Empty the kettle and rinse the inside thoroughly.
5 Fill the kettle with clean water and boil the water.
6 Empty the kettle and rinse it with clean water again.
� Repeat the procedure if there is still some scale in the kettle.
You can also use an appropriate descaler. In that case, follow the instructions on the
package of the descaler.
Replacement.
Replacement filters for your kettle can be purchased from your Philips dealer or a
Philips service centre. The table below indicates which filters are suitable for your
electric kettle.
If the kettle, the base or the mains cord of the appliance is damaged, take the base
or the kettle to a service centre authorised by Philips for repair or replacement of
the cord to avoid a hazard.
Guarantee & service.
If you need information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Customer Care Centre in your country (you
will find its phone number in the world-wide guarantee leaflet). If there is no
Customer Care Centre in your country, turn to your local Philips dealer or contact
the Service Department of Philips Domestic Appliances and Personal Care BV.
Kettle type(s)Filter type
HD4650HD4973
HD4652HD4977 (triple-action filter)
HD4653 and HD4657HD4976 (triple-action filter)
HD4659HD4971 |
ACEC
PHILIPS
