CONNECTIONS
1) ELECTRICAL CONNECTIONS2.2 Non-polarized plugs (e.g. 2 pin with side
?Warning - this appliance must be earth contact)
earthed?The wire which is coloured GREEN AND
YELLOW must be connected to the earth
This appliance is normally supplied with a
contact. The other two wires should be
mains lead having a plug fitted in the factory
which has been checked for correct earth connected to the two pins, irrespective of
colour.
continuity.
If the fitted plug is not suitable for your socket
3) FUSE REPLACEMENT
outlet, or if the machin?s mains leead is not
fitted with a plug, you should fit a suitabIf the mainle new, s lead of this appliance is fitted with
good quality plug by following the instructioa BS 136ns in 3A 13 amp fused plug, replace the
(2) below.fuse only with an A.S.T.A. approved type
conforming to BS 1362 and proceed as follows:
Any unsuitable plug should be cut off and
disposed of in order to avoid a possible shock
hazard should it be inserted into a socket.
2) CONNECTION TO A REWIRABLE
PLUG - to be carried out only by a
qualified electrician
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - ?NEUTRAL ? (?N?)
BROWN - ?LIVE? (?L?)
GREEN AND YELLOW - ?EARTH ? (?E?)
To fit a new plug, proceed as follows:
2.1 Polarized Plugs (e.g. 3 pin, 13 amp plug
conforming to BS 1363A)
a. The GREEN AND YELLOW wire must be 1. Remove the fuse covAe) and ther ( fuse
connected to the terminal in the plug wh(B).ich
is marked with the Eletter or by the Earth
2. Fit the replacement 13 A fuse into the fuse
symbol or coloured yellow or green and
cover.
yellow.
3. Refit both into the plug.
b. The BLUE wire must be connected to the
For all other types of plug, the supply socket
terminal which is marked withN the or letter
should be protected by a 16 A fuse or circuit
coloured black.
breaker at the distribution board.
c. The BROWN wire must be connected to the
terminal which is marked with L or the letter
coloured red.
57 |