3GB20100.fm Page 4 Monday, February 23, 2004 6:24 PM
Please read the Instructions Manual carefully before using your new washing machine
GB
Quick Reference Guide
Programme selectorOptions
To select a programme, turn the knob. Selecting any option the indication lights up .
The corresponding symbol will appear on the display. When the combination of programme, additional options and
To change the programme once the wash cycle has temperature is not possible, the indication lights switch off
started, turn the knob to ? ? and set the new automatically. Unsuitable combinations of options are deselected
programme. automatically.
When the knob is on ? ? three dashes blink on the
Start Delay
display.
Delays the start of the wash cycle by 1 to 16 hours.
Start button
When you press this button, it lights up and the wash Each time the button is pressed, the start of the wash
cycle starts. At the end of the wash cycle the light will cycle is delayed by 1 hour.
turn off and END will appear on the display.Prewash
Only for heavily soiled laundry (e.g. sand, granular
dirt). Programmes with Prewash last approx. 15
On/Off button
minutes longer.
This button switches the washing machine on/off.
Intensive rinse button
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for
areas with particularly soft water, for baby clothes
Changing or interrupting the programme during the wash cycleand to help people with allergies.
Turn the programme selector to the ?? position.Easy Ironing
Select the new programme (with temperature), any options and Can be used together with Cotton and Synthetic
another spin speed if you want.programmes to make ironing easier.
Press the ?Start? button again. If the ?On/Off? button is pressed, no
Spin
detergent has to added.
Every programme has an automatic predefined
Cancelling a programme before the end
maximum spin speed.
Turn the programme selector to the ?? position.Press the button to select a different spin speed.
Set the programme selector to programme setting ?Drain/Spin.If the spin speed ?0? is selected, the final spin is
Press the ?Start? button to start the ?Drain/Spin? cycle.cancelled. The water is drained out only.
Display
Quick wash
Shows the wash cycle sequence.For quick, economical washes. Especially suitable for
small, lightly soiled loads. This option can be used
with Cotton and Synthetic programmes. Selecting this
function allows you to shorten the wash cycle time
depending on the temperature.
Note: reduce the detergent quantity.
Power and water consumption data
Programme Prewash cycle increases programme duration
Temperature LoadWaterEnergyby approx. 15 minutes. Consumption values
Duration
Programmeselectorwere measured in normalized conditions in
approx.
(°C)(kg)(l)(kWh)(hours : minutes)*compliance with Standard IEC 60 456.
Consumption data in the home may vary with
Cotton905,049**1,201:56respect to the values in the table in relation to
the water supply pressure and temperature,
Cotton605,0490,952:13the load and the type of wash.
Cotton405,0490,452:00* The remaining time display may differ from
the values given in the table since it
Synthetic602,5420,801:44depends on the conditions of use in the
home.
Synthetic402,5420,431:34
** To reduce the water temperature, some
Synthetics short302,0300,300:40cold water is added at the end of the main
wash cycle, before the pump drains the
Delicate301,5470,450:53water out.
Wool401,0580,450:48
Hand wash302,0550,250:51
-5019 301 20100
(We reserve the right to make technical modifications)
Black process 45.0° 150.0 LPI |