Specifications
4 Extension cord - To help prevent electric shock, doTuner section
not use a polarized AC power plug with an extensionFrequency range, antenna � FM: 87.5 - 108.0 MHz,
cord, receptacle, or other outlet unless the polarizedRod antenna, FM antenna terminal: 75 ohms
plug can be completely inserted to prevent exposure(unbalanced). AM: 530/531 - 1,710/1,602 kHz (10/9 kHz
of the blades of the plug.step), AM loop antenna.
5 When not in use - Unplug the AC power cord fromDeck section
the AC outlet or remove all the batteries if the unit
Track format � 4 tracks, 2 channels / Frequency range
will not be used for several months or more. When� Normal tape: 50 - 12,500 Hz (EIAJ) / Recording
the cord is plugged in, a small amount of currentsystem � AC bias / Erasing system � AC erase / Heads
continues to flow to the unit, even when the power is� Recording/playback head (1), Erasure head (1)
turned off.
CD player section
Disc � Compact disc / Scanning method � Non-contact
Outdoor Antenna
optical scanner (semiconductor laser)
1 Power lines - When connecting an outdoor antenna,
make sure it is located away from power lines.General
2 Outdoor antenna grounding - Be sure the antennaSpeaker � 100 mm cone type (2) / Output �
system is properly grounded to provide protectionHeadphones jack (stereo mini-jack) / Power output �
against unexpected voltage surges or static10 W + 10 W (EIAJ, 4 ohms, T.H.D. 10%) / Power
electricity build-up. Article 810 of the Nationalrequirements � AC 120 V, 60 Hz / Power consumption �
Electrical Code, ANSI/NFPA 70, provides40 W / Power consumption in standby mode � With
information on proper grounding of the mast,ECO mode on: 1.2 W, With ECO mode off: 9.4 W /
supporting structure, and the lead-in wire to theDimensions (W ´ H ´ D) � 482 ´ 168 ´ 231 mm (19 ´
65/ ´ 91/ in.) / Weight � 6.7 kg (14 lbs. 12 oz.) /
antenna discharge unit, as well as the size of the88
Accessories � Remote control (1), AC cord (1), AM loop
grounding unit, connection to grounding terminals,
antenna (1)
and requirements for grounding terminals
themselves.
Specifications and external appearance are subject to
Antenna Grounding According to the National Electrical Codechange without notice.
En
ANTENNA LEAD IN WIRECOPYRIGHT
Please check the copyright laws relating to
ANTENNA DISCHARGE recordings from disc, radio or external tape for the
GROUND CLAMPUNITcountry in which the machine is being used.
(NEC SECTION 810-20)
ELECTRICGROUNDING
SERVICECONDUCTORS
EQUIPMENT(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC-NATIONAL ELECTRICAL CODE
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service
technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have got inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been
If an erroneous display or malfunction occurs
damaged
Turn off the unit and press POWER 6STANDBY/ON
DO NOT ATTEMPT TO SERVICE THE UNIT
while pressing s.
YOURSELF.
If the unit cannot be reset in the way above, disconnect
the AC cord to turn off the display.
Leave the unit for a while and turn the power back on.
ENGLISH 3 |
ACEC
