AV-20320
AV-20321
STATIC CONVERGENCE ADJUSTMENT
1. Input a crosshatch signal.
2. Using 4-pole convergence magnets, overlap the red and blue
lines in the center of the screen (Fig.1) and turn them to
magenta (red/blue).
(FRONT VIEW)
3. Using 6-pole convergence magnets, overlap the
magenta(red/blue) and green lines in the center of the screen
and turn them to white.
4. Repeat 2 and 3 above, and make best convergence.
Fig.1
(FRONT VIEW)
DYNAMIC CONVERGENCE ADJUSTMENTREDGREEN BLUE
1. Move the deflection yoke up and down and overlap the lines in
the periphery. (Fig. 2)
BLUERED
2. Move the deflection yoke left to right and overlap the lines in theGREENGREEN
periphery. (Fig. 3)
REDBLUE
3. Repeat 1 and 2 above, and make best convergence.
BLUE GREENRED
Fig.2
� After adjustment, fix the wedge at the original position.(FRONT VIEW)
Fasten the retainer screw of the deflection yoke.
Fix the 6 magnets with glue.GREENGREEN
REDBLUEBLUEREDRED
GREEN
BLUE
BLUE
GREEN
RED
Fig.3
24No. 51964 |
ACEC
