4.8.5 VSM PRESET SETTING
Measuring
ItemTest pointAdjustment partDescription
instrument
VSM PRESETRemote [5.VSM PRESET](1) Set the ZOOM mode to FULL.
control unit(BRIGHT/STD/SOFT)(2) Select 5.VSM PRESET from the SERVICE MENU.
1. CONT.(3) Press the [MENU] key, and set the PICTURE MODE
2. BRIGHTto BRIGHT.
3. SHARP(4) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
4. COLOURbring the set values of 1.CONT. to 5. HUE to the
5. HUEvalues shown in the [5. VSM PRESET].
(COOL/WARM/NORMAL)(5) Press the [MENU] key, and set the PICTURE MODE
1. WDR Rto STD.
2. WDR G(6) Make similar adjustment as in 4 above.
3. WDR B(7) Press the [MENU] key, and set the PICTURE MODE
to SOFT.
(8) Make similar adjustment as in 4 above.
(9) Press the [MENU] key, and set the COLOUR TEMP
to COOL.
(10) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
bring the set values of 1.WDR R to 3. WDR B to the
values shown in the table.
(11) Press the [MENU] key, and set the COLOUR TEMP
to WARM.
(12) Make similar adjustment as in 10 above.
(13) Press the [MENU] key, and set the COLOUR TEMP
to NORMAL.
(14) Make similar adjustment as in 10 above.
1-34 (No.YA063) |
ACEC
