8Referring to Fig. 2-3, disconnect one connector.8Referring to Fig. 2-6, remove three screws that secure the
Support Plate and remove the Support Plate.
Remove three screws.
DisconnectSupport Plate
one
connector.
Fig. 2-6
8Referring to Fig. 2-7, remove four screws that secure the
Fig. 2-3Inner Dome Cover and pull up the Inner Dome Cover.
Remove four screws.
8Referring to Fig. 2-4, remove the Dome Ring by turning it
counterclockwise.Inner Dome
CoverDome Ring
Fig. 2-7
8Referring to Fig. 2-8, loosen one screw and disconnect
one connector.
Fig. 2-4Disconnect one
8Referring to Fig. 2-5, remove one screw that secures theconnector.
Camera Mounting Plate and remove the Camera
Mounting Plate.
Loosen one
screw.
Fig. 2-8
Camera Mounting PlateRemove one screw.
Fig. 2-5
� 4 � |
ACEC
