Tools and Test EquipmentC155
Battery Function
The telephone displays a battery charge indicator icon in the idle screen to indicate the battery
charge level. The gauge shows four levels: 100%, 66%, 33%, and Low Battery.
Removing the battery causes the phone to shut down immediately and loose any pending work
(partially entered phone book entries or outgoing messages, for example).
All batteries can cause property damage and/or bodily injury such as burns if a conductive
material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive
material may complete an electrical circuit (short circuit) and become quite hot. Exercise care
in handling any charged battery, particularly when placing it inside a pocket, purse, or other
container with metal objects.
If the battery is removed while receiving a message, the message is lost.
To ensure proper memory retention, turn the phone OFF before removing the battery.
Immediately replace the old battery with a fresh battery.
Tools and Test Equipment
The table below lists the tools and test equipment used on C155 telephones. Use either the
listed items or equivalents.
Table 1: General Test Equipment and Tools
1
Motorola Part NumberDescriptionApplication
See Table 6ChargerUsed to charge battery and power!phone
0180386A82Antistatic Mat Kit (includes 66-80387A95 Provides protection from damage to!
antistatic mat, 66-80334B36 ground phone caused by electrostatic discharge!
cord, and 42-80385A59 wrist band)(ESD)
8102430Z04GSM / DCS / PCS Test SIMUsed to enable manual test mode
6680388B67Disassembly tool, plastic with flat and Used during assembly/disassembly
pointed ends (manual opening tool)
6680388B01Tweezers, plasticUsed during assembly/disassembly
-Torque Driver Bit T-5 Plus, Apex 440-6IP Used with torque driver
Torx Plus or equivalent
HP34401A2Digital MultimeterUsed to measure battery voltage
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or!
FAX (800) 622-6210. Internationally, AAD can be reached by calling (847) 538-8023 or by fax (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
15June 1, 2004 |
ACEC
