Level 1 and 2 Service ManualSpecifications
Specifications
General Function Specification
824-848 MHz Tx
Frequency Range GSM 850
869-893 MHz Rx
880-915 MHz Tx (with EGSM)
Frequency Range GSM 900
925-960 MHZ Rx
1710-1785 MHz Tx
Frequency Range DCS 1800
1805-1880 MHz Rx
1850-1910 MHz Tx
Frequency Range PCS 1900
1930-1990 MHz Rx
Channel Spacing200 kHz
174 EGSM, 374 DCS, 374 PCS, carriers
Channels
with 8 channels per carrier
ModulationGMSK at BT = 0.3
Transmitter Phase Accuracy5 Degrees RMS, 20 Degrees peak
Duplex Spacing45 MHz GSM, 95 MHz DCS, 80 MHz PCS
Frequency Stability? 0.10 ppm of the downlink frequency (Rx)
+3.0V dc to +4.2V dc (cell)
Operating Voltage+4.4V dc to +6.6V dc (external charger jack
with 2.4 K ohm resistor)
Average Transmit Current300 mA max
Average Stand-by Current4.0 mA max (DRX2), 2.0 mA max (DRX9)
108mm x 46mm x 20.5mm
Dimensions
(4.3 inches x 1.8 inches x 0.81 inches)
3
Size (Volume)89 cc (5.4 in)
Weight110 gm (3.9 oz) with cell
Temperature Range-10 C to +55 C (+15 F to +130 F)
Battery Life, 800 mAh Li Ion BatteryTalk time 300-600 min., 240-360 min. with
Bluetooth turned on.
Standby time 215 Hrs., 210 Hrs. with
Bluetooth turned on.
All talk and standby times are approximate
and depend on network configuration,
signal strength, and features selected.
Standby times are quoted as a range from
DRX=2 to DRX=9. Talk times are quoted
as a range from DTX off to DTX on.
Transmitter Specification
33 dBm nominal GSM 900
RF Power Output30 dBm nominal GSM 1800
30 dBm nominal GSM 1900
Output Impedance50 ohms nominal
-36 dBm from 0.1 to 1 GHz,
Spurious Emissions
-30 dBm from 1 to 4 GHz
Receiver Specification
-106 dBm GSM 900,
Receive Sensitivity-104 dBm GSM 1800,
-104 dBm PCS
RX bit error rate (100k bits) Type II< 2%
Channel Hop Time500 microseconds
6809480A37-O April 21, 2004 9 |
ACEC
