4. Thermostat Control Knob
Turn the Thermostat Control Knob as shown in Fig. 4. Usually 6 ~ 7 is the
recommended setting position.
Note: When the Thermostat Control Knob is set to 10 , moisture may freeze
onto the evaporator fins and prevent effective cooling. If this happens, turn
the Main Control Knob to HIGH FAN, and the Thermostat Control Knob
counterclockwise. This will quickly defrost the evaporator fins so that normal
cooling can be resumed.
Fig.4
5. Air Swing Switch
(Airflow direction adjustment side-to-side)
To obtain a fixed airflow direction, set the Air Swing Switch to ON for the
vanes to swing from side to side until the desired flow direction is reached,
then switch it to OFF .
For continuous side-to-side air circulation, set the Air Swing Switch to ON .
Fig. 5
12 |
ACEC
