14. Standard Inspection Specifications after Making
Repairs
After making repairs, we recommend performing the following inspection, to check normal
operation.
No.ProcedureItem to Check
1 Turn on the power, and confirm items pointed out. Items pointed out should reappear.
2 Insert RAM disc.The Panasonic RAM disc should be recognized.
3 Enter the EE (TU IN / AV IN - AV OUT) mode.No abnormality should be seen in the picture,
sound or operation.
4 Perform auto recording and playback for one No abnormality should be seen in the picture,
minute using the RAM disc.sound or operation.
*Panasonic DVD-RAM disc should be used
recording and playback.
5 Model with the HDD: Perform auto recording and No abnormality should be seen in the picture,
playback for one minute using the HDD.sound or operation.
6 If a problem is caused by a VCD, DVD-R, DVD-No abnormality should be seen in the picture,
Video, Audio-CD, or MP3, playback the test disc.sound or operation.
7 Models with SD Card Slot or DV Input Jack: In Models with SD Card Slot or DV Input Jack
case of that the trouble is caused by SD card and/1) SD card: Check to be able to display and
or DV terminal.the picture.
2) DV terminal: Check to be able to record
DVC.
8 After checking and making repairs, upgrade the Make sure that [FIRM_SUCCESS] appears
firmware to the latest version.FL displays.
*[UNSUPPORT] display means the unit is
updated to newest same version. Then version
is not necessary.
9 Transfer [9][9] in the service mode setting, and Make sure that [CLR SERV] appears in the
initialize the service settings (return various display.
settings and error information to their default After checking it, turn the power off.
values. The laser time is not included in this
initialization).
10 When replacing of RAM drive, transfer [9] [5] in Make sure that [CLR LASER] appears in the
the service mode setting to delete Laser used display.
time.After that, turn power off.
Use the following checklist to establish the judgement criteria for the picture and sound.
43 |
ACEC
