DMR-ES15P / DMR-ES15PC
ItemFL displayKey operation
Mode nameDescriptionFront Key
AgingPerform sequence of modes as * AgingDisplay following the then modeWhen.the power is ON, press
Description shown below continually.[STOP],[POWER]and
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit?s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode, press
[POWER] key.
Aging Contents (Example):
DemonstrationEjection of the disc is prohibited.*When lock the tray.When the power is on, press
lock/unlockThe lock setting is effective until unlocking the[STOP]and[POWER]keys
tray and not released by ?Main unitsimultaneously for 5 seconds.
initialization? of service mode.
?LOCK? is displayed for 3 seconds.
*When unlock the tray.When the power is on, press
[STOP]and[POWER]keys
simultaneously for 5 seconds.
?UNLOCK? is displayed for 3
seconds.
*When press OPEN/CLOSE keyPress [OPEN/CLOSE] key while the
while the tray being locked.tray being locked.
Display ?LOCK? for 3 seconds.
ATP Initialization ATP setting is initialized, and the unitIt isturnssameofwithfdisplay in stopWmodehen t.he power is on (E-E mode),
automatically.press [CH UP] and [CH DOWN]
simultaneously for 5 seconds.
Progressive initializationThe progressive setting is initialiThezeddisplatoy beforeexecuWthenionthe power is on (E-E mode),
Interlace.leaves.press[STOP]and[PLAY]
simultaneously for 5 seconds.
13 |
ACEC
