1 August 1988
13.Shake the new cartridge of
toner well.
14.Set the pins [A] of the toner
cartridge into the slots on the
development unit, and turn the
cartridge counterclockwise.
15.To open the cartridge seal, in-
sert the cartridge crank onto
the shaft of the toner cartridge
and turn it clockwise unit it
stops. Then, remove the
cartridge crank.
NOTE: At installation, it is recom-
mended to load two
cartridges of toner.
16. Lower the top unit.
17. Close the front cover.
3-8 |